Re: [Linaro-acpi] [PATCH v9 5/5] Watchdog: introduce ARM SBSA watchdog driver
From: Graeme Gregory
Date: Mon Nov 09 2015 - 05:20:51 EST
Hi Fu Wei,
Looks ok to me.
Reviewed by: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
Thanks
On Mon, Nov 09, 2015 at 03:31:19PM +0800, fu.wei@xxxxxxxxxx wrote:
> From: Fu Wei <fu.wei@xxxxxxxxxx>
>
> This driver bases on linux kernel watchdog framework, and
> use "pretimeout" in the framework. It supports getting timeout and
> pretimeout from parameter and FDT at the driver init stage.
> In first timeout, the interrupt routine run panic to save
> system context.
>
> Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
> Tested-by: Pratyush Anand <panand@xxxxxxxxxx>
> ---
> drivers/watchdog/Kconfig | 14 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/sbsa_gwdt.c | 459 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 474 insertions(+)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 79e1aa1..5cc8455 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -173,6 +173,20 @@ config ARM_SP805_WATCHDOG
> ARM Primecell SP805 Watchdog timer. This will reboot your system when
> the timeout is reached.
>
> +config ARM_SBSA_WATCHDOG
> + tristate "ARM SBSA Generic Watchdog"
> + depends on ARM64
> + depends on ARM_ARCH_TIMER
> + select WATCHDOG_CORE
> + help
> + ARM SBSA Generic Watchdog. This watchdog has two Watchdog timeouts.
> + The first timeout will trigger a panic; the second timeout will
> + trigger a system reset.
> + More details: ARM DEN0029B - Server Base System Architecture (SBSA)
> +
> + To compile this driver as module, choose M here: The module
> + will be called sbsa_gwdt.
> +
> config AT91RM9200_WATCHDOG
> tristate "AT91RM9200 watchdog"
> depends on SOC_AT91RM9200 && MFD_SYSCON
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 0c616e3..b74a3ea 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
>
> # ARM Architecture
> obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
> +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o
> obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
> obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
> obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o
> diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c
> new file mode 100644
> index 0000000..6fd1c63
> --- /dev/null
> +++ b/drivers/watchdog/sbsa_gwdt.c
> @@ -0,0 +1,459 @@
> +/*
> + * SBSA(Server Base System Architecture) Generic Watchdog driver
> + *
> + * Copyright (c) 2015, Linaro Ltd.
> + * Author: Fu Wei <fu.wei@xxxxxxxxxx>
> + * Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License 2 as published
> + * by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * The SBSA Generic watchdog driver is compatible with the pretimeout
> + * concept of Linux kernel.
> + * The timeout and pretimeout are determined by WCV or WOR.
> + * The first watch period is set by writing WCV directly, that can
> + * support more than 10s timeout at the maximum system counter
> + * frequency (400MHz).
> + * When WS0 is triggered, the second watch period (pretimeout) is
> + * determined by one of these registers:
> + * (1)WOR: 32bit register, this gives a maximum watch period of
> + * around 10s at the maximum system counter frequency. It's loaded
> + * automatically by hardware.
> + * (2)WCV: If the pretimeout value is greater then "max_wor_timeout",
> + * it will be loaded in WS0 interrupt routine. If system is in
> + * ws0_mode (reboot with watchdog enabled and WS0 == true), the ping
> + * operation will only reload WCV.
> + * More details about the hardware specification of this device:
> + * ARM DEN0029B - Server Base System Architecture (SBSA)
> + *
> + * Kernel/API: P------------------| pretimeout
> + * |----------------------------------------T timeout
> + * SBSA GWDT: P---WOR (or WCV)---WS1 pretimeout
> + * |-------WCV----------WS0~~~(ws0_mode)~~~~T timeout
> + */
> +
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/watchdog.h>
> +#include <asm/arch_timer.h>
> +
> +/* SBSA Generic Watchdog register definitions */
> +/* refresh frame */
> +#define SBSA_GWDT_WRR 0x000
> +
> +/* control frame */
> +#define SBSA_GWDT_WCS 0x000
> +#define SBSA_GWDT_WOR 0x008
> +#define SBSA_GWDT_WCV_LO 0x010
> +#define SBSA_GWDT_WCV_HI 0x014
> +
> +/* refresh/control frame */
> +#define SBSA_GWDT_W_IIDR 0xfcc
> +#define SBSA_GWDT_IDR 0xfd0
> +
> +/* Watchdog Control and Status Register */
> +#define SBSA_GWDT_WCS_EN BIT(0)
> +#define SBSA_GWDT_WCS_WS0 BIT(1)
> +#define SBSA_GWDT_WCS_WS1 BIT(2)
> +
> +/**
> + * struct sbsa_gwdt - Internal representation of the SBSA GWDT
> + * @wdd: kernel watchdog_device structure
> + * @clk: store the System Counter clock frequency, in Hz.
> + * @ws0_mode: indicate the system boot in the second stage timeout.
> + * @max_wor_timeout: the maximum timeout value for WOR (in seconds).
> + * @refresh_base: Virtual address of the watchdog refresh frame
> + * @control_base: Virtual address of the watchdog control frame
> + */
> +struct sbsa_gwdt {
> + struct watchdog_device wdd;
> + u32 clk;
> + bool ws0_mode;
> + int max_wor_timeout;
> + void __iomem *refresh_base;
> + void __iomem *control_base;
> +};
> +
> +#define to_sbsa_gwdt(e) container_of(e, struct sbsa_gwdt, wdd)
> +
> +#define DEFAULT_TIMEOUT 60 /* seconds, the 1st + 2nd watch periods*/
> +#define DEFAULT_PRETIMEOUT 30 /* seconds, the 2nd watch period*/
> +
> +static unsigned int timeout;
> +module_param(timeout, uint, 0);
> +MODULE_PARM_DESC(timeout,
> + "Watchdog timeout in seconds. (>=0, default="
> + __MODULE_STRING(DEFAULT_TIMEOUT) ")");
> +
> +static unsigned int pretimeout;
> +module_param(pretimeout, uint, 0);
> +MODULE_PARM_DESC(pretimeout,
> + "Watchdog pretimeout in seconds. (>=0, default="
> + __MODULE_STRING(DEFAULT_PRETIMEOUT) ")");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, S_IRUGO);
> +MODULE_PARM_DESC(nowayout,
> + "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +/*
> + * help functions for accessing 64bit WCV register
> + */
> +static u64 sbsa_gwdt_get_wcv(struct watchdog_device *wdd)
> +{
> + u32 wcv_lo, wcv_hi;
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> +
> + do {
> + wcv_hi = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCV_HI);
> + wcv_lo = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCV_LO);
> + } while (wcv_hi != readl_relaxed(gwdt->control_base +
> + SBSA_GWDT_WCV_HI));
> +
> + return (((u64)wcv_hi << 32) | wcv_lo);
> +}
> +
> +static void sbsa_gwdt_set_wcv(struct watchdog_device *wdd, unsigned int t)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> + u64 wcv;
> +
> + wcv = arch_counter_get_cntvct() + (u64)t * gwdt->clk;
> +
> + writel_relaxed(upper_32_bits(wcv),
> + gwdt->control_base + SBSA_GWDT_WCV_HI);
> + writel_relaxed(lower_32_bits(wcv),
> + gwdt->control_base + SBSA_GWDT_WCV_LO);
> +}
> +
> +/*
> + * inline functions for reloading 64bit WCV register
> + */
> +static inline void reload_pretimeout_to_wcv(struct watchdog_device *wdd)
> +{
> + sbsa_gwdt_set_wcv(wdd, wdd->pretimeout);
> +}
> +
> +static inline void reload_first_stage_to_wcv(struct watchdog_device *wdd)
> +{
> + sbsa_gwdt_set_wcv(wdd, wdd->timeout - wdd->pretimeout);
> +}
> +
> +/*
> + * watchdog operation functions
> + */
> +static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + wdd->timeout = timeout;
> +
> + return 0;
> +}
> +
> +static int sbsa_gwdt_set_pretimeout(struct watchdog_device *wdd,
> + unsigned int pretimeout)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> + u32 wor;
> +
> + wdd->pretimeout = pretimeout;
> +
> + /* If ws0_mode == true, we won't touch WOR */
> + if (!gwdt->ws0_mode) {
> + if (!pretimeout)
> + /*
> + * If pretimeout is 0, it gives driver a timeslot (1s)
> + * to update WCV after an explicit refresh
> + * (sbsa_gwdt_start)
> + */
> + wor = gwdt->clk;
> + else
> + if (pretimeout > gwdt->max_wor_timeout)
> + wor = U32_MAX;
> + else
> + wor = pretimeout * gwdt->clk;
> +
> + /* wtite WOR, that will cause an explicit watchdog refresh */
> + writel_relaxed(wor, gwdt->control_base + SBSA_GWDT_WOR);
> + }
> +
> + return 0;
> +}
> +
> +static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> + u64 timeleft = sbsa_gwdt_get_wcv(wdd) - arch_counter_get_cntvct();
> +
> + do_div(timeleft, gwdt->clk);
> +
> + return timeleft;
> +}
> +
> +static int sbsa_gwdt_keepalive(struct watchdog_device *wdd)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> +
> + if (gwdt->ws0_mode)
> + reload_pretimeout_to_wcv(wdd);
> + else
> + reload_first_stage_to_wcv(wdd);
> +
> + return 0;
> +}
> +
> +static int sbsa_gwdt_start(struct watchdog_device *wdd)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> +
> + /* If ws0_mode == true, the watchdog is enabled */
> + if (!gwdt->ws0_mode)
> + /* writing WCS will cause an explicit watchdog refresh */
> + writel_relaxed(SBSA_GWDT_WCS_EN,
> + gwdt->control_base + SBSA_GWDT_WCS);
> +
> + return sbsa_gwdt_keepalive(wdd);
> +}
> +
> +static int sbsa_gwdt_stop(struct watchdog_device *wdd)
> +{
> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
> +
> + writel_relaxed(0, gwdt->control_base + SBSA_GWDT_WCS);
> + /*
> + * Writing WCS has caused an explicit watchdog refresh.
> + * Both watchdog signals are deasserted, so clean ws0_mode flag.
> + */
> + gwdt->ws0_mode = false;
> +
> + return 0;
> +}
> +
> +static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id)
> +{
> + struct sbsa_gwdt *gwdt = (struct sbsa_gwdt *)dev_id;
> + struct watchdog_device *wdd = &gwdt->wdd;
> +
> + /* We don't use pretimeout, trigger WS1 now */
> + if (!wdd->pretimeout)
> + sbsa_gwdt_set_wcv(wdd, 0);
> +
> + /*
> + * The pretimeout is valid, go panic
> + * If pretimeout is greater then "max_wor_timeout",
> + * reload the right value to WCV, then panic
> + */
> + if (wdd->pretimeout > gwdt->max_wor_timeout)
> + reload_pretimeout_to_wcv(wdd);
> + panic("SBSA Watchdog pre-timeout");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static struct watchdog_info sbsa_gwdt_info = {
> + .identity = "SBSA Generic Watchdog",
> + .options = WDIOF_SETTIMEOUT |
> + WDIOF_KEEPALIVEPING |
> + WDIOF_MAGICCLOSE |
> + WDIOF_PRETIMEOUT |
> + WDIOF_CARDRESET,
> +};
> +
> +static struct watchdog_ops sbsa_gwdt_ops = {
> + .owner = THIS_MODULE,
> + .start = sbsa_gwdt_start,
> + .stop = sbsa_gwdt_stop,
> + .ping = sbsa_gwdt_keepalive,
> + .set_timeout = sbsa_gwdt_set_timeout,
> + .set_pretimeout = sbsa_gwdt_set_pretimeout,
> + .get_timeleft = sbsa_gwdt_get_timeleft,
> +};
> +
> +static int sbsa_gwdt_probe(struct platform_device *pdev)
> +{
> + void __iomem *rf_base, *cf_base;
> + struct device *dev = &pdev->dev;
> + struct watchdog_device *wdd;
> + struct sbsa_gwdt *gwdt;
> + struct resource *res;
> + int ret, irq;
> + u32 status;
> +
> + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
> + if (!gwdt)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, gwdt);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + cf_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(cf_base))
> + return PTR_ERR(cf_base);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + rf_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(rf_base))
> + return PTR_ERR(rf_base);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(dev, "unable to get ws0 interrupt.\n");
> + return irq;
> + }
> +
> + /*
> + * Get the frequency of system counter from the cp15 interface of ARM
> + * Generic timer. We don't need to check it, because if it returns "0",
> + * system would panic in very early stage.
> + */
> + gwdt->clk = arch_timer_get_cntfrq();
> + gwdt->refresh_base = rf_base;
> + gwdt->control_base = cf_base;
> + gwdt->max_wor_timeout = U32_MAX / gwdt->clk;
> + gwdt->ws0_mode = false;
> +
> + wdd = &gwdt->wdd;
> + wdd->parent = dev;
> + wdd->info = &sbsa_gwdt_info;
> + wdd->ops = &sbsa_gwdt_ops;
> + watchdog_set_drvdata(wdd, gwdt);
> + watchdog_set_nowayout(wdd, nowayout);
> +
> + wdd->min_pretimeout = 0;
> + wdd->min_timeout = 1;
> +
> + /*
> + * Because the maximum of gwdt->clk is 400MHz and the maximum of WCV is
> + * U64_MAX, so the result of (U64_MAX / gwdt->clk) is always greater
> + * than U32_MAX. And the maximum of "unsigned int" is U32_MAX on ARM64.
> + * So we set the maximum value of pretimeout and timeout below.
> + */
> + wdd->max_pretimeout = U32_MAX - 1;
> + wdd->max_timeout = U32_MAX;
> +
> + wdd->pretimeout = DEFAULT_PRETIMEOUT;
> + wdd->timeout = DEFAULT_TIMEOUT;
> + watchdog_init_timeouts(wdd, pretimeout, timeout, dev);
> +
> + status = readl_relaxed(gwdt->control_base + SBSA_GWDT_WCS);
> + if (status & SBSA_GWDT_WCS_WS1) {
> + dev_warn(dev, "System reset by WDT.\n");
> + wdd->bootstatus |= WDIOF_CARDRESET;
> + } else if (status == (SBSA_GWDT_WCS_WS0 | SBSA_GWDT_WCS_EN)) {
> + gwdt->ws0_mode = true;
> + }
> +
> + ret = devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0,
> + pdev->name, gwdt);
> + if (ret) {
> + dev_err(dev, "unable to request IRQ %d\n", irq);
> + return ret;
> + }
> +
> + ret = watchdog_register_device(wdd);
> + if (ret)
> + return ret;
> +
> + /* If ws0_mode == true, the line won't update WOR */
> + sbsa_gwdt_set_pretimeout(wdd, wdd->pretimeout);
> +
> + /*
> + * If watchdog is already enabled, do a ping operation
> + * to keep system running
> + */
> + if (status & SBSA_GWDT_WCS_EN)
> + sbsa_gwdt_keepalive(wdd);
> +
> + dev_info(dev, "Initialized with %ds timeout, %ds pretimeout @ %u Hz%s\n",
> + wdd->timeout, wdd->pretimeout, gwdt->clk,
> + status & SBSA_GWDT_WCS_EN ?
> + gwdt->ws0_mode ? " [second stage]" : " [enabled]" :
> + "");
> +
> + return 0;
> +}
> +
> +static void sbsa_gwdt_shutdown(struct platform_device *pdev)
> +{
> + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
> +
> + sbsa_gwdt_stop(&gwdt->wdd);
> +}
> +
> +static int sbsa_gwdt_remove(struct platform_device *pdev)
> +{
> + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&gwdt->wdd);
> +
> + return 0;
> +}
> +
> +/* Disable watchdog if it is active during suspend */
> +static int __maybe_unused sbsa_gwdt_suspend(struct device *dev)
> +{
> + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
> +
> + if (watchdog_active(&gwdt->wdd))
> + sbsa_gwdt_stop(&gwdt->wdd);
> +
> + return 0;
> +}
> +
> +/* Enable watchdog and configure it if necessary */
> +static int __maybe_unused sbsa_gwdt_resume(struct device *dev)
> +{
> + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
> +
> + if (watchdog_active(&gwdt->wdd))
> + sbsa_gwdt_start(&gwdt->wdd);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops sbsa_gwdt_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume)
> +};
> +
> +static const struct of_device_id sbsa_gwdt_of_match[] = {
> + { .compatible = "arm,sbsa-gwdt", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match);
> +
> +static const struct platform_device_id sbsa_gwdt_pdev_match[] = {
> + { .name = "sbsa-gwdt", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match);
> +
> +static struct platform_driver sbsa_gwdt_driver = {
> + .driver = {
> + .name = "sbsa-gwdt",
> + .pm = &sbsa_gwdt_pm_ops,
> + .of_match_table = sbsa_gwdt_of_match,
> + },
> + .probe = sbsa_gwdt_probe,
> + .remove = sbsa_gwdt_remove,
> + .shutdown = sbsa_gwdt_shutdown,
> + .id_table = sbsa_gwdt_pdev_match,
> +};
> +
> +module_platform_driver(sbsa_gwdt_driver);
> +
> +MODULE_DESCRIPTION("SBSA Generic Watchdog Driver");
> +MODULE_AUTHOR("Fu Wei <fu.wei@xxxxxxxxxx>");
> +MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.5.0
>
> _______________________________________________
> Linaro-acpi mailing list
> Linaro-acpi@xxxxxxxxxxxxxxxx
> https://lists.linaro.org/mailman/listinfo/linaro-acpi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/