Re: [PATCH v5] net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller
From: Eric Dumazet
Date: Tue Nov 10 2015 - 12:55:53 EST
On Tue, 2015-11-10 at 16:14 +0000, Mans Rullgard wrote:
> This adds a driver for the Aurora VLSI NB8800 Ethernet controller.
> It is an almost complete rewrite of a driver originally found in
> a Sigma Designs 2.6.22 tree.
...
> +
> +static void nb8800_receive(struct net_device *dev, int i, int len)
> +{
> + struct nb8800_priv *priv = netdev_priv(dev);
> + struct nb8800_rx_desc *rxd = &priv->rx_descs[i];
> + struct page *page = priv->rx_bufs[i].page;
> + int offset = priv->rx_bufs[i].offset;
> + void *data = page_address(page) + offset;
> + dma_addr_t dma = rxd->desc.s_addr;
> + struct sk_buff *skb;
> + int size;
> + int err;
> +
> + size = len <= RX_COPYBREAK ? len : RX_COPYHDR;
> +
> + skb = napi_alloc_skb(&priv->napi, size);
> + if (!skb) {
> + netdev_err(dev, "rx skb allocation failed\n");
> + dev->stats.rx_dropped++;
> + return;
> + }
> +
> + if (len <= RX_COPYBREAK) {
> + dma_sync_single_for_cpu(&dev->dev, dma, len, DMA_FROM_DEVICE);
> + memcpy(skb_put(skb, len), data, len);
> + dma_sync_single_for_device(&dev->dev, dma, len,
> + DMA_FROM_DEVICE);
> + } else {
> + err = nb8800_alloc_rx(dev, i, true);
> + if (err) {
> + netdev_err(dev, "rx buffer allocation failed\n");
> + dev->stats.rx_dropped++;
> + return;
> + }
> +
> + dma_unmap_page(&dev->dev, dma, RX_BUF_SIZE, DMA_FROM_DEVICE);
> + memcpy(skb_put(skb, RX_COPYHDR), data, RX_COPYHDR);
> + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
> + offset + RX_COPYHDR, len - RX_COPYHDR,
> + RX_BUF_SIZE);
> + }
> +
> + skb->protocol = eth_type_trans(skb, dev);
> + netif_receive_skb(skb);
> +}
> +
Any reason you do not use napi_gro_receive(&priv->napi, skb) instead of
netif_receive_skb() ?
I see you correctly use late napi_complete_done(napi, work), but this
matters only if napi_gro_receive() was used.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/