Re: [PATCH 19/20] staging/wilc1000: use more regular probing

From: Andy Shevchenko
Date: Wed Nov 11 2015 - 02:55:04 EST

Next message: Eddie Huang: "Re: [PATCH v5 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135"
Previous message: Mike Christie: "Re: [dm-devel] [RFC PATCH 00/32] separate operations from flags in the bio/request structs"
In reply to: Arnd Bergmann: "[PATCH 19/20] staging/wilc1000: use more regular probing"
Next in thread: Arnd Bergmann: "Re: [PATCH 19/20] staging/wilc1000: use more regular probing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Nov 11, 2015 at 1:42 AM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> So far, my patches tried to do equivalent conversions of the
> existing code. This one goes beyond that by restructuring
> how the devices get probed. In particular, the spi driver
> no longer creates the netdev until the device is probed,
> and I've removed the global wilc_sdio_func and wilc_spi_dev
> variables in favor of retrieving them from the wilc_dev
> variable that will eventually get passed through all functions
> instead of using a global.
>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> drivers/staging/wilc1000/linux_wlan.c | 6 +-
> drivers/staging/wilc1000/linux_wlan_common.h | 12 ---
> drivers/staging/wilc1000/linux_wlan_sdio.c | 30 +++----
> drivers/staging/wilc1000/linux_wlan_spi.c | 122 +++++++++------------------
> drivers/staging/wilc1000/wilc_debugfs.c | 6 +-
> 5 files changed, 58 insertions(+), 118 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
> index 0d6c22ca7920..c3b521e085f2 100644
> --- a/drivers/staging/wilc1000/linux_wlan.c
> +++ b/drivers/staging/wilc1000/linux_wlan.c
> @@ -1408,10 +1408,6 @@ void wilc_netdev_cleanup(struct wilc *wilc)
> }
>
> kfree(wilc);
> -
> -#if defined(WILC_DEBUGFS)
> - wilc_debugfs_remove();
> -#endif
> }
> EXPORT_SYMBOL_GPL(wilc_netdev_cleanup);
>
> @@ -1491,3 +1487,5 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
> return 0;
> }
> EXPORT_SYMBOL_GPL(wilc_netdev_init);
> +
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/wilc1000/linux_wlan_common.h b/drivers/staging/wilc1000/linux_wlan_common.h
> index f2ea8280b8f8..72b524a98cba 100644
> --- a/drivers/staging/wilc1000/linux_wlan_common.h
> +++ b/drivers/staging/wilc1000/linux_wlan_common.h
> @@ -38,9 +38,6 @@ enum debug_region {
> #define FIRM_DBG (1 << Firmware_debug)
>
> #if defined (WILC_DEBUGFS)

if this is still in use?
Is it about DEBUG or DEBUGFS?

> -int wilc_debugfs_init(void);
> -void wilc_debugfs_remove(void);
> -
> extern atomic_t WILC_REGION;
> extern atomic_t WILC_DEBUG_LEVEL;
>
> @@ -122,15 +119,6 @@ extern atomic_t WILC_DEBUG_LEVEL;
> printk(__VA_ARGS__); \
> } while (0)
>
> -static inline int wilc_debugfs_init(void)
> -{
> - return 0;
> -}
> -
> -static inline void wilc_debugfs_remove(void)
> -{
> -}
> -
> #endif
>
> #define FN_IN /* PRINT_D(">>> \n") */
> diff --git a/drivers/staging/wilc1000/linux_wlan_sdio.c b/drivers/staging/wilc1000/linux_wlan_sdio.c
> index 9072de43bcd9..1f366b5f0d2d 100644
> --- a/drivers/staging/wilc1000/linux_wlan_sdio.c
> +++ b/drivers/staging/wilc1000/linux_wlan_sdio.c
> @@ -135,12 +135,14 @@ static void linux_sdio_remove(struct sdio_func *func)
> wilc_netdev_cleanup(sdio_get_drvdata(func));
> }
>
> -static struct sdio_driver wilc_bus = {
> +static struct sdio_driver wilc1000_sdio_driver = {
> .name = SDIO_MODALIAS,
> .id_table = wilc_sdio_ids,
> .probe = linux_sdio_probe,
> .remove = linux_sdio_remove,
> };
> +module_driver(wilc1000_sdio_driver, sdio_register_driver, sdio_unregister_driver);
> +MODULE_LICENSE("GPL");
>
> int wilc_sdio_enable_interrupt(struct wilc *dev)
> {
> @@ -178,14 +180,15 @@ void wilc_sdio_disable_interrupt(struct wilc *dev)
> static int linux_sdio_set_speed(int speed)
> {
> struct mmc_ios ios;
> + struct sdio_func *func = container_of(wilc_dev->dev, struct sdio_func, dev);

Macro for specific container_of?

>
> - sdio_claim_host(wilc_sdio_func);
> + sdio_claim_host(func);
>
> - memcpy((void *)&ios, (void *)&wilc_sdio_func->card->host->ios, sizeof(struct mmc_ios));
> - wilc_sdio_func->card->host->ios.clock = speed;
> + memcpy((void *)&ios, (void *)&func->card->host->ios, sizeof(struct mmc_ios));

Hm... Do we need to explicitly cast pointers to void*?

> + func->card->host->ios.clock = speed;
> ios.clock = speed;
> - wilc_sdio_func->card->host->ops->set_ios(wilc_sdio_func->card->host, &ios);
> - sdio_release_host(wilc_sdio_func);
> + func->card->host->ops->set_ios(func->card->host, &ios);
> + sdio_release_host(func);
> PRINT_INFO(INIT_DBG, "@@@@@@@@@@@@ change SDIO speed to %d @@@@@@@@@\n", speed);
>
> return 1;
> @@ -193,7 +196,8 @@ static int linux_sdio_set_speed(int speed)
>
> static int linux_sdio_get_speed(void)
> {
> - return wilc_sdio_func->card->host->ios.clock;
> + struct sdio_func *func = container_of(wilc_dev->dev, struct sdio_func, dev);
> + return func->card->host->ios.clock;
> }
>
> int wilc_sdio_init(void)
> @@ -218,16 +222,4 @@ int wilc_sdio_set_default_speed(void)
> return linux_sdio_set_speed(sdio_default_speed);
> }
>
> -static int __init init_wilc_sdio_driver(void)
> -{
> - return sdio_register_driver(&wilc_bus);
> -}
> -late_initcall(init_wilc_sdio_driver);
> -
> -static void __exit exit_wilc_sdio_driver(void)
> -{
> - sdio_unregister_driver(&wilc_bus);
> -}
> -module_exit(exit_wilc_sdio_driver);
> -
> MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/wilc1000/linux_wlan_spi.c b/drivers/staging/wilc1000/linux_wlan_spi.c
> index a7a52593156a..1d8922d6eb6a 100644
> --- a/drivers/staging/wilc1000/linux_wlan_spi.c
> +++ b/drivers/staging/wilc1000/linux_wlan_spi.c
> @@ -8,6 +8,7 @@
> #include <linux/uaccess.h>
> #include <linux/device.h>
> #include <linux/spi/spi.h>
> +#include <linux/of_gpio.h>
>
> #include "linux_wlan_spi.h"
> #include "wilc_wfi_netdevice.h"
> @@ -43,59 +44,53 @@
>
> static u32 SPEED = MIN_SPEED;
>
> -struct spi_device *wilc_spi_dev;
> +static const struct wilc1000_ops wilc1000_spi_ops;
>
> -static int __init wilc_bus_probe(struct spi_device *spi)
> +static int wilc_bus_probe(struct spi_device *spi)
> {
> + int ret, gpio;
> + struct wilc *wilc;
>
> - PRINT_D(BUS_DBG, "spiModalias: %s\n", spi->modalias);
> - PRINT_D(BUS_DBG, "spiMax-Speed: %d\n", spi->max_speed_hz);
> - wilc_spi_dev = spi;
> + gpio = of_get_gpio(spi->dev.of_node, 0);
> + if (gpio < 0)
> + gpio = GPIO_NUM;
> +
> + ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, GPIO_NUM, &wilc_hif_spi);
> + if (ret)
> + return ret;
> +
> + spi_set_drvdata(spi, wilc);
> + wilc->dev = &spi->dev;
>
> - printk("Driver Initializing success\n");
> return 0;
> }
>
> -static int __exit wilc_bus_remove(struct spi_device *spi)
> +static int wilc_bus_remove(struct spi_device *spi)
> {
> -
> + wilc_netdev_cleanup(spi_get_drvdata(spi));
> return 0;
> }
>
> -#ifdef CONFIG_OF
> static const struct of_device_id wilc1000_of_match[] = {
> { .compatible = "atmel,wilc_spi", },
> {}
> };
> MODULE_DEVICE_TABLE(of, wilc1000_of_match);
> -#endif
>
> -static struct spi_driver wilc_bus __refdata = {
> +struct spi_driver wilc1000_spi_driver = {
> .driver = {
> .name = MODALIAS,
> -#ifdef CONFIG_OF
> .of_match_table = wilc1000_of_match,
> -#endif
> },
> .probe = wilc_bus_probe,
> - .remove = __exit_p(wilc_bus_remove),
> + .remove = wilc_bus_remove,
> };
> +module_spi_driver(wilc1000_spi_driver);
> +MODULE_LICENSE("GPL");
>
> int wilc_spi_init(void)
> {
> - int ret = 1;
> - static int called;
> -
> -
> - if (called == 0) {
> - called++;
> - ret = spi_register_driver(&wilc_bus);
> - }
> -
> - /* change return value to match WILC interface */
> - (ret < 0) ? (ret = 0) : (ret = 1);
> -
> - return ret;
> + return 1;
> }
>
> #if defined(PLAT_WMS8304)
> @@ -106,6 +101,7 @@ int wilc_spi_init(void)
>
> int wilc_spi_write(u8 *b, u32 len)
> {
> + struct spi_device *spi = to_spi_device(wilc_dev->dev);
> int ret;
>
> if (len > 0 && b != NULL) {
> @@ -132,11 +128,11 @@ int wilc_spi_write(u8 *b, u32 len)
>
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA;
>
> spi_message_add_tail(&tr, &msg);
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -157,11 +153,11 @@ int wilc_spi_write(u8 *b, u32 len)
>
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA; /* rachel */
>
> spi_message_add_tail(&tr, &msg);
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -183,7 +179,7 @@ int wilc_spi_write(u8 *b, u32 len)
> #else
> int wilc_spi_write(u8 *b, u32 len)
> {
> -
> + struct spi_device *spi = to_spi_device(wilc_dev->dev);
> int ret;
> struct spi_message msg;
>
> @@ -204,12 +200,12 @@ int wilc_spi_write(u8 *b, u32 len)
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> /* [[johnny add */
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA;
> /* ]] */
> spi_message_add_tail(&tr, &msg);
>
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -234,6 +230,7 @@ int wilc_spi_write(u8 *b, u32 len)
>
> int wilc_spi_read(u8 *rb, u32 rlen)
> {
> + struct spi_device *spi = to_spi_device(wilc_dev->dev);
> int ret;
>
> if (rlen > 0) {
> @@ -260,11 +257,11 @@ int wilc_spi_read(u8 *rb, u32 rlen)
>
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA;
>
> spi_message_add_tail(&tr, &msg);
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -284,11 +281,11 @@ int wilc_spi_read(u8 *rb, u32 rlen)
>
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA; /* rachel */
>
> spi_message_add_tail(&tr, &msg);
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -308,7 +305,7 @@ int wilc_spi_read(u8 *rb, u32 rlen)
> #else
> int wilc_spi_read(u8 *rb, u32 rlen)
> {
> -
> + struct spi_device *spi = to_spi_device(wilc_dev->dev);
> int ret;
>
> if (rlen > 0) {
> @@ -329,12 +326,12 @@ int wilc_spi_read(u8 *rb, u32 rlen)
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> /* [[ johnny add */
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA;
> /* ]] */
> spi_message_add_tail(&tr, &msg);
>
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -353,7 +350,7 @@ int wilc_spi_read(u8 *rb, u32 rlen)
>
> int wilc_spi_write_read(u8 *wb, u8 *rb, u32 rlen)
> {
> -
> + struct spi_device *spi = to_spi_device(wilc_dev->dev);
> int ret;
>
> if (rlen > 0) {
> @@ -370,11 +367,11 @@ int wilc_spi_write_read(u8 *wb, u8 *rb, u32 rlen)
>
> memset(&msg, 0, sizeof(msg));
> spi_message_init(&msg);
> - msg.spi = wilc_spi_dev;
> + msg.spi = spi;
> msg.is_dma_mapped = USE_SPI_DMA;
>
> spi_message_add_tail(&tr, &msg);
> - ret = spi_sync(wilc_spi_dev, &msg);
> + ret = spi_sync(spi, &msg);
> if (ret < 0) {
> PRINT_ER("SPI transaction failed\n");
> }
> @@ -395,40 +392,3 @@ int wilc_spi_set_max_speed(void)
> PRINT_INFO(BUS_DBG, "@@@@@@@@@@@@ change SPI speed to %d @@@@@@@@@\n", SPEED);
> return 1;
> }
> -
> -static struct wilc *wilc;
> -
> -static int __init init_wilc_spi_driver(void)
> -{
> - int ret;
> -
> - wilc_debugfs_init();
> -
> - ret = wilc_netdev_init(&wilc, NULL, HIF_SPI, GPIO_NUM, &wilc_hif_spi);
> - if (ret) {
> - wilc_debugfs_remove();
> - return ret;
> - }
> -
> - if (!wilc_spi_init() || !wilc_spi_dev) {
> - PRINT_ER("Can't initialize SPI\n");
> - wilc_netdev_cleanup(wilc);
> - wilc_debugfs_remove();
> - return -ENXIO;
> - }
> - wilc_dev->dev = &wilc_spi_dev->dev;
> -
> - return ret;
> -}
> -late_initcall(init_wilc_spi_driver);
> -
> -static void __exit exit_wilc_spi_driver(void)
> -{
> - if (wilc)
> - wilc_netdev_cleanup(wilc);
> - spi_unregister_driver(&wilc_bus);
> - wilc_debugfs_remove();
> -}
> -module_exit(exit_wilc_spi_driver);
> -
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/staging/wilc1000/wilc_debugfs.c b/drivers/staging/wilc1000/wilc_debugfs.c
> index 158a1df17195..27c653a0cdf9 100644
> --- a/drivers/staging/wilc1000/wilc_debugfs.c
> +++ b/drivers/staging/wilc1000/wilc_debugfs.c
> @@ -138,7 +138,7 @@ static struct wilc_debugfs_info_t debugfs_info[] = {
> { "wilc_debug_region", 0666, (INIT_DBG | GENERIC_DBG | CFG80211_DBG), FOPS(NULL, wilc_debug_region_read, wilc_debug_region_write, NULL), },
> };
>
> -int wilc_debugfs_init(void)
> +static int __init wilc_debugfs_init(void)
> {
> int i;
>
> @@ -173,11 +173,13 @@ int wilc_debugfs_init(void)
> }
> return 0;
> }
> +module_init(wilc_debugfs_init);
>
> -void wilc_debugfs_remove(void)
> +static void __exit wilc_debugfs_remove(void)
> {
> debugfs_remove_recursive(wilc_dir);
> }
> +module_exit(wilc_debugfs_remove);
>
> #endif
>
> --
> 2.1.0.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Eddie Huang: "Re: [PATCH v5 4/5] ARM: dts: mt8135: enable basic SMP bringup for mt8135"
Previous message: Mike Christie: "Re: [dm-devel] [RFC PATCH 00/32] separate operations from flags in the bio/request structs"
In reply to: Arnd Bergmann: "[PATCH 19/20] staging/wilc1000: use more regular probing"
Next in thread: Arnd Bergmann: "Re: [PATCH 19/20] staging/wilc1000: use more regular probing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]