Re: [PATCH 08/19] drm: Add Allwinner A10 Display Engine support

[Maxime Ripard]

Hi Daniel,

Thanks for your review!

On Fri, Oct 30, 2015 at 03:44:09PM +0100, Daniel Vetter wrote:
> > +static void sun4i_crtc_disable(struct drm_crtc *crtc)
> > +{
> > +	struct sun4i_crtc *scrtc = drm_crtc_to_sun4i_crtc(crtc);
> > +	struct sun4i_drv *drv = scrtc->drv;
> > +
> > +	DRM_DEBUG_DRIVER("Disabling the CRTC\n");
> > +
> > +	if (!scrtc->enabled)
> > +		return;
> 
> Please don't do this - the atomic state should always reflect the true hw
> state (fix that up with either hw state readout or reset in the ->reset
> callbacks), and the atomic helpers guarantee that they'll never call you
> when not needed. If you don't trust them do a WARN_ON at least, but no
> early silent returns.
> 
> Personally I'd just rip it out, it's too much trouble. And for debugging
> the atomic helpers already trace it all (or at least should).

Ok. Is there a preferred way to do HW state readout, or should I just
add that to my probe?

> > +static int sun4i_drv_connector_plug_all(struct drm_device *drm)
> 
> Laurent Pinchart has this as a rfc patch for drm core, please coordinate
> with him and rebase on top of his patches.

Ack, I will.

> > +static int sun4i_drv_enable_vblank(struct drm_device *drm, int pipe)
> > +{
> > +	struct sun4i_drv *drv = drm->dev_private;
> > +	struct sun4i_tcon *tcon = drv->tcon;
> > +
> > +	DRM_DEBUG_DRIVER("Enabling VBLANK on pipe %d\n", pipe);
> > +
> > +	sun4i_tcon_enable_vblank(tcon, true);
> > +
> > +	return 0;
> 
> atomic helpers rely on enable_vblank failing correctly when the pipe is
> off and vlbanks will never happen. You probably need a correct error code
> here that checks crtc->state->active (well not that directly but something
> derived from it, since the pointer chase would be racy).

Ok.

> I know it's a bit a mess since we don't have kms-native vblank driver
> hooks yet and really the drm core should get this right for you. It'll
> happen eventually, but drm_irq.c is a bit moldy ;-)

I can't really use drm_irq anyway, since we don't have a single
interrupt for the VBLANK, but two, that we have to use depending on
the output.

> > +static void sun4i_drv_disable_vblank(struct drm_device *drm, int pipe)
> > +{
> > +	struct sun4i_drv *drv = drm->dev_private;
> > +	struct sun4i_tcon *tcon = drv->tcon;
> > +
> > +	DRM_DEBUG_DRIVER("Disabling VBLANK on pipe %d\n", pipe);
> > +
> > +	sun4i_tcon_enable_vblank(tcon, false);
> > +}
> > +
> > +static int sun4i_drv_load(struct drm_device *drm, unsigned long flags)
> 
> load/unload callbacks are depracated since fundamentally racy, and we
> can't fix that due to the pile of legacy dri1 drivers. Please use
> drm_dev_alloc/register/unregister/unref functions instead, with the
> load/unload code placed in between to avoid races with userspace seeing
> the device/driver (e.g. in sysfs) while it's in a partially defunct state.
> 
> Relevant kerneldoc has the details, at least in linux-next.

Ok.

> > +static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
> > +					      struct drm_plane_state *old_state)
> > +{
> > +	struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
> > +	struct sun4i_drv *drv = layer->drv;
> > +	struct sun4i_backend *backend = drv->backend;
> > +
> > +	sun4i_backend_update_layer_coord(backend, layer->id, plane);
> > +	sun4i_backend_update_layer_formats(backend, layer->id, plane);
> > +	sun4i_backend_update_layer_buffer(backend, layer->id, plane);
> > +	sun4i_backend_layer_enable(backend, layer->id, true);
> > +	sun4i_backend_commit(backend);
> 
> Not idea how exactly your hw works, but the call to sun4i_backend_commit
> probably should be in the crtc->atomic_flush function, to make sure that
> plane updates across multiple planes are indeed atomic.

The hardware will not take the register writes into account until a
bit is set (in the _commit function), so I guess putting it in
atomic_flush makes sense.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature