[PATCH] net: phy: at803x: support interrupt on 8030 and 8035

[Mans Rullgard]

Commit 77a993942 "phy/at8031: enable at8031 to work on interrupt mode"
added interrupt support for the 8031 PHY but left out the other two
chips supported by this driver.

This patch sets the .ack_interrupt and .config_intr functions for the
8030 and 8035 drivers as well.

Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
---
I have only tested this with an 8035.  I can't find a datasheet for
the 8030, but since 8031, 8032, and 8035 all have the same register
layout, there's a good chance 8030 does as well.
---
 drivers/net/phy/at803x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index fabf11d..2d020a3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -308,6 +308,8 @@ static struct phy_driver at803x_driver[] = {
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
+	.ack_interrupt		= at803x_ack_interrupt,
+	.config_intr		= at803x_config_intr,
 	.driver			= {
 		.owner = THIS_MODULE,
 	},
@@ -327,6 +329,8 @@ static struct phy_driver at803x_driver[] = {
 	.flags			= PHY_HAS_INTERRUPT,
 	.config_aneg		= genphy_config_aneg,
 	.read_status		= genphy_read_status,
+	.ack_interrupt		= at803x_ack_interrupt,
+	.config_intr		= at803x_config_intr,
 	.driver			= {
 		.owner = THIS_MODULE,
 	},
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/