[PATCH 1/2] arm: boot: dts: beaglex15: Remove ID GPIO

[Felipe Balbi]

According to latest schematics [1], this board
leaves ID pin floating. It's not connected to
anything at all.

So let's remove it.

[1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf

Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 00352e761b8c..6f3a1a7ec5f9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -560,8 +560,6 @@
 		extcon_usb2: tps659038_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
 		};
 
 	};
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/