Re: [PATCH RESEND] net: smsc911x: Reset PHY during initialization

[David Miller]

From: Pavel Fedin <p.fedin@xxxxxxxxxxx>
Date: Fri, 13 Nov 2015 09:46:59 +0300

> On certain hardware after software reboot the chip may get stuck and fail
> to reinitialize during reset. This can be fixed by ensuring that PHY is
> reset too.
> 
> Old PHY resetting method required operational MDIO interface, therefore
> the chip should have been already set up. In order to be able to function
> during probe, it is changed to use PMT_CTRL register.
> 
> The problem could be observed on SMDK5410 board.
> 
> Signed-off-by: Pavel Fedin <p.fedin@xxxxxxxxxxx>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/