[RFC 2/2] iio: ina2xx: convert AVERGING ratio setting from generic sysfs attr to ABI
From: Marc Titinger
Date: Tue Nov 17 2015 - 05:44:39 EST
using the proposed ABI addition for IIO_CHAN_INFO_AVERAGING_RATIO, convert
the sysfs attribute for averaging ratio to using in_averaging_ratio as a
directory-bound channel info.
Signed-off-by: Marc Titinger <mtitinger@xxxxxxxxxxxx>
---
drivers/iio/adc/ina2xx-iio.c | 47 ++++++--------------------------------------
1 file changed, 6 insertions(+), 41 deletions(-)
diff --git a/drivers/iio/adc/ina2xx-iio.c b/drivers/iio/adc/ina2xx-iio.c
index d4dd908..f6daa5b 100644
--- a/drivers/iio/adc/ina2xx-iio.c
+++ b/drivers/iio/adc/ina2xx-iio.c
@@ -179,7 +179,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
return ina2xx_get_value(chip, chan->address, regval, val, val2);
- case IIO_CHAN_INFO_AVERAGE_RAW:
+ case IIO_CHAN_INFO_AVERAGING_RATIO:
*val = chip->avg;
return IIO_VAL_INT;
@@ -219,6 +219,8 @@ static int ina2xx_calibrate(struct ina2xx_chip_info *chip)
*/
static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
+static IIO_CONST_ATTR_AVERAGING_RATIO_AVAIL("1, 4, 16, 64, 128, 256, 512, 1024");
+
static unsigned int ina226_set_average(struct ina2xx_chip_info *chip,
unsigned int val,
unsigned int *config)
@@ -286,7 +288,7 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
tmp = config;
switch (mask) {
- case IIO_CHAN_INFO_AVERAGE_RAW:
+ case IIO_CHAN_INFO_AVERAGING_RATIO:
ret = ina226_set_average(chip, val, &tmp);
break;
@@ -308,40 +310,6 @@ _err:
return ret;
}
-
-static ssize_t ina2xx_averaging_steps_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
-
- return sprintf(buf, "%d\n", chip->avg);
-}
-
-
-static ssize_t ina2xx_averaging_steps_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-{
- unsigned long val;
- int ret;
-
- ret = kstrtoul((const char *) buf, 10, &val);
- if (ret)
- return -EINVAL;
-
- /* unexposed missuse of INFO_AVERAGE_RAW, until a proper ABI for the
- * averaging steps setting is specified.
- */
- ret = ina2xx_write_raw(dev_to_iio_dev(dev), NULL, val, 0,
- IIO_CHAN_INFO_AVERAGE_RAW);
- if (ret < 0)
- return ret;
-
- return len;
-}
-
-
#define INA2XX_CHAN(_type, _index, _address) { \
.type = _type, \
.address = _address, \
@@ -349,6 +317,7 @@ static ssize_t ina2xx_averaging_steps_store(struct device *dev,
.channel = (_index), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_AVERAGING_RATIO) | \
BIT(IIO_CHAN_INFO_CALIBSCALE), \
.scan_index = (_index), \
.scan_type = { \
@@ -382,13 +351,9 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
/* frequencies matching the cummulated integration times for vshunt and vbus */
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("61 120 236 455 850 1506 2450 3571");
-static IIO_DEVICE_ATTR(in_averaging_steps, S_IRUGO | S_IWUSR,
- ina2xx_averaging_steps_show,
- ina2xx_averaging_steps_store, 0);
-
static struct attribute *ina2xx_attributes[] = {
- &iio_dev_attr_in_averaging_steps.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_const_attr_averaging_ratio_available.dev_attr.attr,
NULL,
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/