Re: [PATCH v5 1/2] dt-bindings: simplefb: Support regulator supply properties

[Rob Herring]

On Tue, Nov 17, 2015 at 12:31:02PM +0800, Chen-Yu Tsai wrote:
> The physical display tied to the framebuffer may have regulators
> providing power to it, such as power for LCDs or interface conversion
> chips.
> 
> The number of regulators in use may vary, but the regulator supply
> binding can not be a list. Instead just support any named regulator
> supply properties under the device node. These should be properly
> named to match the device schematics / design. The driver should
> take care to go through them all.
> 
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Acked-by: Mark Brown <broonie@xxxxxxxxxx>

Not really happy to see the continued expansion of simplefb binding, but

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
>  .../devicetree/bindings/display/simple-framebuffer.txt      | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> index 4474ef6e0b95..8c9e9f515c87 100644
> --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> @@ -47,10 +47,14 @@ Required properties:
>    - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
>  
>  Optional properties:
> -- clocks : List of clocks used by the framebuffer. Clocks listed here
> -           are expected to already be configured correctly. The OS must
> -           ensure these clocks are not modified or disabled while the
> -           simple framebuffer remains active.
> +- clocks : List of clocks used by the framebuffer.
> +- *-supply : Any number of regulators used by the framebuffer. These should
> +	     be named according to the names in the device's design.
> +
> +  The above resources are expected to already be configured correctly.
> +  The OS must ensure they are not modified or disabled while the simple
> +  framebuffer remains active.
> +
>  - display : phandle pointing to the primary display hardware node
>  
>  Example:
> @@ -68,6 +72,7 @@ chosen {
>  		stride = <(1600 * 2)>;
>  		format = "r5g6b5";
>  		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
> +		lcd-supply = <&reg_dc1sw>;
>  		display = <&lcdc0>;
>  	};
>  	stdout-path = "display0";
> -- 
> 2.6.2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/