Re: [PATCH 2/5] PCI: iproc: Add PAXC interface support

[Florian Fainelli]

On 17/11/15 16:46, Ray Jui wrote:
> 
> 
> On 11/17/2015 4:34 PM, Florian Fainelli wrote:
>> On 17/11/15 16:31, Ray Jui wrote:
>>> Traditionally, all iProc PCIe root complexes use PAXB based wrapper,
>>> with an integrated on-chip Serdes to support external endpoint devices.
>>> On newer iProc platforms, a PAXC based wrapper is introduced, for
>>> connection with internally emulated PCIe endpoint devices in the ASIC
>>>
>>> This patch adds support for PAXC based iProc PCIe root complex in the
>>> iProc PCIe core driver. This change fators out common logic between
>>> PAXB and PAXC, and use tables to store register offsets that are
>>> different between PAXB and PAXC. This allows the driver to be scaled to
>>> support subsequent PAXC revisions in the future
>>>
>>> Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx>
>>> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
>>> ---
>>>   drivers/pci/host/pcie-iproc-platform.c |   8 ++
>>>   drivers/pci/host/pcie-iproc.c          | 202
>>> +++++++++++++++++++++++++++------
>>>   drivers/pci/host/pcie-iproc.h          |  19 ++++
>>>   3 files changed, 195 insertions(+), 34 deletions(-)
>>>
>>> diff --git a/drivers/pci/host/pcie-iproc-platform.c
>>> b/drivers/pci/host/pcie-iproc-platform.c
>>> index c9550dc..716b56b 100644
>>> --- a/drivers/pci/host/pcie-iproc-platform.c
>>> +++ b/drivers/pci/host/pcie-iproc-platform.c
>>> @@ -42,6 +42,13 @@ static int iproc_pcie_pltfm_probe(struct
>>> platform_device *pdev)
>>>       pcie->dev = &pdev->dev;
>>>       platform_set_drvdata(pdev, pcie);
>>>
>>> +    if (of_device_is_compatible(np, "brcm,iproc-pcie"))
>>> +        pcie->type = IPROC_PCIE_PAXB;
>>> +    else if (of_device_is_compatible(np, "brcm,iproc-pcie-paxc"))
>>> +        pcie->type = IPROC_PCIE_PAXC;
>>> +    else
>>> +        return -ENODEV;
>>
>> Sorry for not noticing earlier, but typically, to avoid repeating the
>> same compatible string twice (once if of_device_id, and somewhere else),
>> you would put the type in the .data member of the of_device_id lookup
>> table and you could fetch this directly here. So something like this:
>>
>>   static const struct of_device_id iproc_pcie_of_match_table[] = {
>>       { .compatible = "brcm,iproc-pcie", .data = (int
>> *)IPROC_PCIE_PAXB },
>> +    { .compatible = "brcm,iproc-pcie-paxc", .data = (int
>> *)IPROC_PCIE_PAXC },
>>       { /* sentinel */ }
>>
> 
> Just to confirm, if I do this, then the above code to check
> of_device_is_compatible becomes the following?
> 
> pcie->type = (enum iproc_pcie_type)of_id->data;

That is correct yes.
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/