[PATCH 58/71] ncr5380: Refactor command completion
From: Finn Thain
Date: Wed Nov 18 2015 - 03:47:16 EST
Implement a 'complete_cmd' function to complete commands. This is needed
by the following patch; the new function provides a site for the logic
needed to correctly handle REQUEST SENSE commands.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 31 ++++++++++++++++++++++------
drivers/scsi/atari_NCR5380.c | 46 ++++++++++++++++++++++++++++---------------
2 files changed, 55 insertions(+), 22 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-11-18 19:34:20.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-11-18 19:34:23.000000000 +1100
@@ -762,6 +762,27 @@ static void NCR5380_exit(struct Scsi_Hos
}
/**
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+#ifdef SUPPORT_TAGS
+ cmd_free_tag(cmd);
+#else
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+#endif
+ cmd->scsi_done(cmd);
+}
+
+/**
* NCR5380_queue_command - queue a command
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
@@ -1361,10 +1382,7 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#endif
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
return 0;
@@ -1875,7 +1893,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
case PHASE_DATAIN:
@@ -1935,7 +1953,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else {
#ifdef REAL_DMA
@@ -1991,8 +2009,6 @@ static void NCR5380_information_transfer
if (ta->queue_size > ta->nr_allocated)
ta->queue_size = ta->nr_allocated;
}
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
/*
@@ -2030,8 +2046,13 @@ static void NCR5380_information_transfer
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
+#ifdef SUPPORT_TAGS
+ cmd_free_tag(cmd);
+#else
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+#endif
} else {
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
}
/*
@@ -2202,15 +2223,10 @@ static void NCR5380_information_transfer
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
+ complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
- cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-11-18 19:34:20.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-11-18 19:34:23.000000000 +1100
@@ -722,6 +722,24 @@ static void NCR5380_exit(struct Scsi_Hos
}
/**
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+
+ cmd->scsi_done(cmd);
+}
+
+/**
* NCR5380_queue_command - queue a command
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
@@ -1178,7 +1196,7 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n",
instance->host_no);
@@ -1766,7 +1784,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
case PHASE_DATAIN:
@@ -1811,7 +1829,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
@@ -1841,7 +1859,6 @@ static void NCR5380_information_transfer
cmd, scmd_id(cmd), cmd->device->lun);
hostdata->connected = NULL;
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
/*
* I'm not sure what the correct thing to do here is :
@@ -1877,8 +1894,9 @@ static void NCR5380_information_transfer
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
+ hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
} else {
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
}
/*
@@ -2025,10 +2043,9 @@ static void NCR5380_information_transfer
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/