[RFC 7/9] iio: ina2xx: add triggered buffer

[Marc Titinger]

Signed-off-by: Marc Titinger <mtitinger@xxxxxxxxxxxx>
---
 drivers/iio/adc/Kconfig      |  3 ++
 drivers/iio/adc/ina2xx-iio.c | 74 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index ebbfff9..929cfb0 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -187,6 +187,9 @@ config INA2XX_IIO
 	tristate "Texas Instruments INA2xx Power Monitors IIO driver"
 	depends on I2C
 	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_HRTIMER_TRIGGER
 	help
 	  Say yes here to build support for TI INA2xx familly Power Monitors.
 
diff --git a/drivers/iio/adc/ina2xx-iio.c b/drivers/iio/adc/ina2xx-iio.c
index d4dd908..e47f30d 100644
--- a/drivers/iio/adc/ina2xx-iio.c
+++ b/drivers/iio/adc/ina2xx-iio.c
@@ -28,6 +28,10 @@
 
 #include <linux/util_macros.h>
 
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
 /*
  * INA2XX registers definition
  */
@@ -294,6 +298,10 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SAMP_FREQ:
 
 		ret = ina226_set_frequency(chip, val, &tmp);
+
+		trace_printk("Enabling buffer w/ freq = %d, avg =%u, period= %u\n",
+                    chip->freq, chip->avg, chip->period_us );
+
 		break;
 
 	default:
@@ -379,6 +387,58 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
 	return regmap_read(chip->regmap, reg, readval);
 }
 
+static s64 prev_ns;
+
+static irqreturn_t ina2xx_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	unsigned short data[8];
+	int bit, ret = 0, i = 0;
+
+	unsigned long buffer_us = 0, elapsed_us = 0;
+	s64 time_a, time_b;
+
+	time_a = iio_get_time_ns();
+
+	/* Single register reads: bulk_read will not work with ina226
+	* as there is no auto-increment of the address register for
+	* data length longer than 16bits.
+	*/
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+					indio_dev->masklength) {
+		unsigned int val;
+
+		ret = regmap_read(chip->regmap,
+				  INA2XX_SHUNT_VOLTAGE + bit, &val);
+		if (ret < 0)
+			goto _err;
+
+		data[i++] = val;
+	}
+
+	time_b = iio_get_time_ns();
+
+	iio_push_to_buffers_with_timestamp(indio_dev, (unsigned int *)data,
+					   time_b);
+
+	buffer_us = (unsigned long)(time_b - time_a) / 1000;
+	elapsed_us = (unsigned long)(time_a - prev_ns) / 1000;
+
+	/* delais in uS */
+	trace_printk("T[k]-T[k_1] = %lu, xfer %lu", elapsed_us, buffer_us);
+
+	ret = IRQ_HANDLED;
+
+        prev_ns = time_a;
+
+_err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return ret;
+}
+
 /* frequencies matching the cummulated integration times for vshunt and vbus */
 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("61 120 236 455 850 1506 2450 3571");
 
@@ -486,9 +546,22 @@ static int ina2xx_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					&ina2xx_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
+static int ina2xx_remove(struct i2c_client *client)
+{
+	iio_triggered_buffer_cleanup(dev_get_drvdata(&client->dev));
+
+	return 0;
+}
+
+
 static const struct i2c_device_id ina2xx_id[] = {
 	{"ina219", ina219},
 	{"ina220", ina219},
@@ -505,6 +578,7 @@ static struct i2c_driver ina2xx_driver = {
 		   .name = KBUILD_MODNAME,
 		   },
 	.probe = ina2xx_probe,
+	.remove = ina2xx_remove,
 	.id_table = ina2xx_id,
 };
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/