Re: [PATCH v11 2/8] Input: goodix - reset device at init

[Bastien Nocera]

On Thu, 2015-11-19 at 14:26 +0200, Irina Tirdea wrote:
> After power on, it is recommended that the driver resets the device.
> The reset procedure timing is described in the datasheet and is used
> at device init (before writing device configuration) and
> for power management. It is a sequence of setting the interrupt
> and reset pins high/low at specific timing intervals. This procedure
> also includes setting the slave address to the one specified in the
> ACPI/device tree.

This fails on a 4.3 kernel with an ACPI device (WinBook TW100):
Goodix-TS: probe of i2c-GDIX1001:00 failed with error -16

Can you please document which upstream commit is necessary to make this
behave properly?

I'll test again with a newer kernel.

Cheers
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/