[PATH RESEND v2 01/10] tty: xuartps: Beautify read-modify writes
From: Soren Brinkmann
Date: Thu Nov 19 2015 - 15:15:24 EST
Non-functional, formatting changes to ease reading the code.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
---
drivers/tty/serial/xilinx_uartps.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 009e0dbc12d2..50d4082d2354 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -515,12 +515,14 @@ static void cdns_uart_start_tx(struct uart_port *port)
if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
return;
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
- /* Set the TX enable bit and clear the TX disable bit to enable the
+ /*
+ * Set the TX enable bit and clear the TX disable bit to enable the
* transmitter.
*/
- writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
- port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR_OFFSET);
+ status &= ~CDNS_UART_CR_TX_DIS;
+ status |= CDNS_UART_CR_TX_EN;
+ writel(status, port->membase + CDNS_UART_CR_OFFSET);
while (numbytes-- && ((readl(port->membase + CDNS_UART_SR_OFFSET) &
CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
@@ -1123,8 +1125,9 @@ static void cdns_uart_console_write(struct console *co, const char *s,
* clear the TX disable bit to enable the transmitter.
*/
ctrl = readl(port->membase + CDNS_UART_CR_OFFSET);
- writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
- port->membase + CDNS_UART_CR_OFFSET);
+ ctrl &= ~CDNS_UART_CR_TX_DIS;
+ ctrl |= CDNS_UART_CR_TX_EN;
+ writel(ctrl, port->membase + CDNS_UART_CR_OFFSET);
uart_console_write(port, s, count, cdns_uart_console_putchar);
cdns_uart_console_wait_tx(port);
--
2.6.3.3.g9bb996a
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/