[PATCH 0/4] Add QCOM DWC3 Phy support

From: Andy Gross
Date: Fri Nov 20 2015 - 03:35:45 EST

This set of patches adds support for the QCOM DWC3 phys found on various
Qualcomm platforms. The PHY portion of this set was originally part of:


The applicable review comments were fixed and additional changes were made to
accomodate the TCSR phy mux selection required to get working ports.

Andy Gross (4):
phy: Add Qualcomm DWC3 HS/SS PHY driver
usb: dwc3: qcom: Configure TCSR phy mux register
ARM: dts: qcom: Add DWC3 USB support on IPQ8064
Documentation: usb: dwc3: qcom: Add TCSR mux usage

.../devicetree/bindings/usb/qcom,dwc3.txt | 11 +
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 24 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 89 ++++
drivers/phy/Kconfig | 11 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-qcom-dwc3.c | 483 +++++++++++++++++++++
drivers/usb/dwc3/dwc3-qcom.c | 25 ++
7 files changed, 644 insertions(+)
create mode 100644 drivers/phy/phy-qcom-dwc3.c

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/