Re: [PATCH] extcon: arizona: Update naming for second jack detection DT binding

[Richard Fitzgerald]

On Fri, 2015-11-20 at 08:39 -0600, Rob Herring wrote:
> On Fri, Nov 20, 2015 at 08:53:59AM +0000, Charles Keepax wrote:
> > Update the name for the second jack detection pin binding to be a little
> > less confusing.
> 
> This breaks compatibility with old dtbs. Either the driver needs to 
> support both names or you just have to live with the old name.
> 

This is a new DT option, it's never gone into a release kernel so there
can't be any dtbs using it.

> > 
> > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/extcon/extcon-arizona.txt  |    4 ++--
> >  drivers/extcon/extcon-arizona.c                    |    4 ++--
> >  2 files changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> > index 03fa7b7..da9813b 100644
> > --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> > +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> > @@ -14,9 +14,9 @@ Optional properties:
> >      If this node is not mentioned or if the value is unknown, then
> >      headphone detection mode is set to HPDETL.
> >  
> > -  - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack
> > +  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
> >      detection.
> > -  - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for
> > +  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
> >      jack detection.
> >    - wlf,jd-invert : Invert the polarity of the jack detection switch
> >  
> > diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> > index 7c9598d..c377030 100644
> > --- a/drivers/extcon/extcon-arizona.c
> > +++ b/drivers/extcon/extcon-arizona.c
> > @@ -1245,9 +1245,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona)
> >  	device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);
> >  
> >  	pdata->jd_gpio5 = device_property_read_bool(arizona->dev,
> > -						    "wlf,use-jd-gpio");
> > +						    "wlf,use-jd2");
> >  	pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,
> > -						"wlf,use-jd-gpio-nopull");
> > +						"wlf,use-jd2-nopull");
> >  
> >  	return 0;
> >  }
> > -- 
> > 1.7.2.5
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/