[GIT pull] irq fixes for 4.4

From: Thomas Gleixner
Date: Sat Nov 21 2015 - 11:41:42 EST


Linus,

please pull the latest irq-urgent-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq-urgent-for-linus

Three fixes for the ARM GIC interrupt controller from Marc addressing
various shortcomings versus boot initialization and suspend/resume.

Thanks,

tglx

------------------>
Marc Zyngier (3):
irqchip/gic: Make sure all interrupts are deactivated at boot
irqchip/gic: Clear enable bits before restoring them
irqchip/gic: Add save/restore of the active state


drivers/irqchip/irq-gic-common.c | 13 +++++++++----
drivers/irqchip/irq-gic.c | 38 ++++++++++++++++++++++++++++++++++++--
2 files changed, 45 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 44a077f3a4a2..f174ce0ca361 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -84,12 +84,15 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs,
writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);

/*
- * Disable all interrupts. Leave the PPI and SGIs alone
- * as they are enabled by redistributor registers.
+ * Deactivate and disable all SPIs. Leave the PPI and SGIs
+ * alone as they are in the redistributor registers on GICv3.
*/
- for (i = 32; i < gic_irqs; i += 32)
+ for (i = 32; i < gic_irqs; i += 32) {
writel_relaxed(GICD_INT_EN_CLR_X32,
- base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ }

if (sync_access)
sync_access();
@@ -102,7 +105,9 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
+ * Make sure everything is deactivated.
*/
+ writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 515c823c1c95..abf2ffaed392 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -73,9 +73,11 @@ struct gic_chip_data {
union gic_base cpu_base;
#ifdef CONFIG_CPU_PM
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_active;
u32 __percpu *saved_ppi_conf;
#endif
struct irq_domain *domain;
@@ -566,6 +568,10 @@ static void gic_dist_save(unsigned int gic_nr)
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
gic_data[gic_nr].saved_spi_enable[i] =
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_active[i] =
+ readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
}

/*
@@ -604,9 +610,19 @@ static void gic_dist_restore(unsigned int gic_nr)
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
dist_base + GIC_DIST_TARGET + i * 4);

- for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(gic_data[gic_nr].saved_spi_active[i],
+ dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }

writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
}
@@ -631,6 +647,10 @@ static void gic_cpu_save(unsigned int gic_nr)
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);

+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
@@ -654,8 +674,18 @@ static void gic_cpu_restore(unsigned int gic_nr)
return;

ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
- for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }

ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
@@ -710,6 +740,10 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
sizeof(u32));
BUG_ON(!gic->saved_ppi_enable);

+ gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_active);
+
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/