Re: [PATCH v2 2/3] arcmsr: adds code for support areca new adapter ARC1203

From: Ching Huang
Date: Wed Nov 25 2015 - 04:48:26 EST

On Wed, 2015-11-25 at 09:43 +0100, Johannes Thumshirn wrote:
> On Wed, 2015-11-25 at 11:25 +0800, Ching Huang wrote:
> > From: Ching Huang <ching2048@xxxxxxxxxxxx>
> >
> > Support areca new PCIe to SATA RAID adapter ARC1203
> >
> > Signed-of-by: Ching Huang<ching2048@xxxxxxxxxxxx>
> >
> > ---
> >
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
> > --- a/drivers/scsi/arcmsr/arcmsr.h 2015-11-25 10:52:16.286470000 +0800
> > +++ b/drivers/scsi/arcmsr/arcmsr.h 2015-11-25 10:52:13.334470000 +0800
> > @@ -74,6 +74,9 @@ struct device_attribute;
> > #ifndef PCI_DEVICE_ID_ARECA_1214
> > #define PCI_DEVICE_ID_ARECA_1214 0x1214
> > #endif
> > +#ifndef PCI_DEVICE_ID_ARECA_1203
> > + #define PCI_DEVICE_ID_ARECA_1203 0x1203
> > +#endif
> > /*
> > ****************************************************************************
> > ******
> > **
> > @@ -245,6 +248,12 @@ struct FIRMWARE_INFO
> > /* window of "instruction flags" from iop to driver */
> > #define ARCMSR_IOP2DRV_DOORBELL 0x00020408
> > #define ARCMSR_IOP2DRV_DOORBELL_MASK 0x0002040C
> > +/* window of "instruction flags" from iop to driver */
> > +#define ARCMSR_IOP2DRV_DOORBELL_1203 0x00021870
> > +#define ARCMSR_IOP2DRV_DOORBELL_MASK_1203 0x00021874
> > +/* window of "instruction flags" from driver to iop */
> > +#define ARCMSR_DRV2IOP_DOORBELL_1203 0x00021878
> > +#define ARCMSR_DRV2IOP_DOORBELL_MASK_1203 0x0002187C
> > /* ARECA FLAG LANGUAGE */
> > /* ioctl transfer */
> > #define ARCMSR_IOP2DRV_DATA_WRITE_OK 0x00000001
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c
> > b/drivers/scsi/arcmsr/arcmsr_hba.c
> > --- a/drivers/scsi/arcmsr/arcmsr_hba.c 2015-11-24 11:35:26.000000000
> > +0800
> > +++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2015-11-24 18:58:40.640226000
> > +0800
> > @@ -114,6 +114,7 @@ static void arcmsr_hardware_reset(struct
> > static const char *arcmsr_info(struct Scsi_Host *);
> > static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
> > static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
> > +static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
> > static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int
> > queue_depth)
> > {
> > if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
> > @@ -157,6 +158,8 @@ static struct pci_device_id arcmsr_devic
> > .driver_data = ACB_ADAPTER_TYPE_B},
> > {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1202),
> > .driver_data = ACB_ADAPTER_TYPE_B},
> > + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1203),
> > + .driver_data = ACB_ADAPTER_TYPE_B},
> > {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210),
> > .driver_data = ACB_ADAPTER_TYPE_A},
> > {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1214),
> > @@ -2621,7 +2624,7 @@ static bool arcmsr_hbaA_get_config(struc
> > }
> > static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
> > {
> > - struct MessageUnit_B *reg = acb->pmuB;
> > + struct MessageUnit_B *reg;
> > struct pci_dev *pdev = acb->pdev;
> > void *dma_coherent;
> > dma_addr_t dma_coherent_handle;
> > @@ -2649,10 +2652,17 @@ static bool arcmsr_hbaB_get_config(struc
> > acb->dma_coherent2 = dma_coherent;
> > reg = (struct MessageUnit_B *)dma_coherent;
> > acb->pmuB = reg;
> > - reg->drv2iop_doorbell= (uint32_t __iomem *)((unsigned long)acb-
> > >mem_base0 + ARCMSR_DRV2IOP_DOORBELL);
> > - reg->drv2iop_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_MASK);
> > - reg->iop2drv_doorbell = (uint32_t __iomem *)((unsigned long)acb-
> > >mem_base0 + ARCMSR_IOP2DRV_DOORBELL);
> > - reg->iop2drv_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_MASK);
> > + if (acb->pdev->device == PCI_DEVICE_ID_ARECA_1203) {
> > + reg->drv2iop_doorbell = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_1203);
> > + reg->drv2iop_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_MASK_1203);
> > + reg->iop2drv_doorbell = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_1203);
> > + reg->iop2drv_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_MASK_1203);
> > + } else {
> > + reg->drv2iop_doorbell= (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL);
> > + reg->drv2iop_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_MASK);
> > + reg->iop2drv_doorbell = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL);
> > + reg->iop2drv_doorbell_mask = (uint32_t __iomem *)((unsigned
> > long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_MASK);
> > + }
>
>
> This isn't quite readable IMHO. Can't you do:
>
> #define MEM_BASE0(x) (u32 __iomem *)((unsigned long)acb->mem_base0 + (x))
> #define MEM_BASE1(x) (u32 __iomem *)((unsigned long)acb->mem_base1 + (x))
>
> and then
>
> reg->drv2iop_doorbell= MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL);
> reg->drv2iop_doorbell_mask = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_MASK);
> reg->iop2drv_doorbell = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL);
> reg->iop2drv_doorbell_mask = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_MASK);
> reg->message_wbuffer = MEM_BASE1(ARCMSR_MESSAGE_WBUFFER);
> reg->message_rbuffer = MEM_BASE1(ARCMSR_MESSAGE_RBUFFER);
> reg->message_rwbuffer = MEM_BASE1(ARCMSR_MESSAGE_RWBUFFER);
>
>
> (Note this hunk is made without your patch. And not tested)
>
Thanks Johannes' advice.
I will revise it.
> > reg->message_wbuffer = (uint32_t __iomem *)((unsigned long)acb-
> > >mem_base1 + ARCMSR_MESSAGE_WBUFFER);
> > reg->message_rbuffer = (uint32_t __iomem *)((unsigned long)acb-
> > >mem_base1 + ARCMSR_MESSAGE_RBUFFER);
> > reg->message_rwbuffer = (uint32_t __iomem *)((unsigned long)acb-
> > >mem_base1 + ARCMSR_MESSAGE_RWBUFFER);
> > @@ -2660,11 +2670,17 @@ static bool arcmsr_hbaB_get_config(struc
> > iop_firm_version = (char __iomem *)(&reg->message_rwbuffer[17]);
> > /*firm_version,17,68-83*/
> > iop_device_map = (char __iomem *)(&reg->message_rwbuffer[21]);
> > /*firm_version,21,84-99*/
> >
> > + arcmsr_wait_firmware_ready(acb);
> > + writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell);
> > + if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
> > + printk(KERN_ERR "arcmsr%d: can't set driver mode.\n", acb-
> > >host->host_no);
> > + goto err_free_dma;
> > + }
> > writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell);
> > if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
> > printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
> > miscellaneous data' timeout \n", acb->host-
> > >host_no);
> > - return false;
> > + goto err_free_dma;
> > }
> > count = 8;
> > while (count){
> > @@ -2707,6 +2723,10 @@ static bool arcmsr_hbaB_get_config(struc
> > acb->firm_cfg_version = readl(&reg-
> > >message_rwbuffer[25]); /*firm_cfg_version,25,100-103*/
> > /*firm_ide_channels,4,16-19*/
> > return true;
> > +err_free_dma:
> > + dma_free_coherent(&acb->pdev->dev, acb->roundup_ccbsize,
> > + acb->dma_coherent2, acb->dma_coherent_handle2);
> > + return false;
> > }
> >
> > static bool arcmsr_hbaC_get_config(struct AdapterControlBlock *pACB)
> > @@ -3998,6 +4018,7 @@ static const char *arcmsr_info(struct Sc
> > case PCI_DEVICE_ID_ARECA_1160:
> > case PCI_DEVICE_ID_ARECA_1170:
> > case PCI_DEVICE_ID_ARECA_1201:
> > + case PCI_DEVICE_ID_ARECA_1203:
> > case PCI_DEVICE_ID_ARECA_1220:
> > case PCI_DEVICE_ID_ARECA_1230:
> > case PCI_DEVICE_ID_ARECA_1260:
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/