[PATCH v4 1/2] ASoC: da7218: Add bindings documentation for DA7218 audio codec

[Adam Thomson]

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/sound/da7218.txt | 104 +++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/da7218.txt

diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
new file mode 100644
index 0000000..5ca5a70
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -0,0 +1,104 @@
+Dialog Semiconductor DA7218 Audio Codec bindings
+
+DA7218 is an audio codec with HP detect feature.
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7217" or "dlg,da7218"
+- reg: Specifies the I2C slave address
+
+- VDD-supply: VDD power supply for the device
+- VDDMIC-supply: VDDMIC power supply for the device
+- VDDIO-supply: VDDIO power supply for the device
+  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
+   information relating to regulators)
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the IRQs from DA7218 are delivered to.
+- interrupts: IRQ line info for DA7218 chip.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+   further information relating to interrupt properties)
+- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
+  interrupt is to be used to wake system, otherwise "irq" should be used.
+- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,mic1-amp-in-sel : Mic1 input source type
+	["diff", "se_p", "se_n"]
+- dlg,mic2-amp-in-sel : Mic2 input source type
+	["diff", "se_p", "se_n"]
+- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic1-samplephase : When to sample audio from DMIC1.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic2-samplephase : When to sample audio from DMic2.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
+			      (DA7217 only)
+
+======
+
+Optional Child node - 'da7218_hpldet' (DA7218 only):
+
+Optional properties:
+- dlg,jack-rate-us : Time between jack detect measurements (us)
+	[<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
+- dlg,jack-debounce : Number of debounce measurements taken for jack detect
+	[<0>, <2>, <3>, <4>]
+- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
+	[<84>, <88>, <92>, <96>]
+- dlg,comp-inv : Boolean flag, invert comparator output
+- dlg,hyst : Boolean flag, enable hysteresis
+- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
+
+======
+
+Example:
+
+	codec: da7218@1a {
+		compatible = "dlg,da7218";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		wakeup-source;
+
+		VDD-supply = <&reg_audio>;
+		VDDMIC-supply = <&reg_audio>;
+		VDDIO-supply = <&reg_audio>;
+
+		clocks = <&clks 201>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl-millivolt = <2600>;
+		dlg,micbias2-lvl-millivolt = <2600>;
+		dlg,mic1-amp-in-sel = "diff";
+		dlg,mic2-amp-in-sel = "diff";
+
+		dlg,dmic1-data-sel = "lrise_rfall";
+		dlg,dmic1-samplephase = "on_clkedge";
+		dlg,dmic1-clkrate-hz = <3000000>;
+		dlg,dmic2-data-sel = "lrise_rfall";
+		dlg,dmic2-samplephase = "on_clkedge";
+		dlg,dmic2-clkrate-hz = <3000000>;
+
+		da7218_hpldet {
+			dlg,jack-rate-us = <40>;
+			dlg,jack-debounce = <2>;
+			dlg,jack-threshold-pct = <84>;
+			dlg,hyst;
+		};
+	};
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/