Re: [PATCH 3/3] mmc: atmel-mci: atmci_convert_chksize depends on controller version
From: Ulf Hansson
Date: Wed Nov 25 2015 - 11:34:08 EST
On 23 November 2015 at 16:27, Ludovic Desroches
<ludovic.desroches@xxxxxxxxx> wrote:
> The atmci_convert_chksize() function is no more valid for controller
> version 0x600 due to the introduction of '2 data' chunk size.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Thanks, applied for next!
Kind regards
Uffe
> ---
> drivers/mmc/host/atmel-mci.c | 43 +++++++++++++++++++++++++++----------------
> 1 file changed, 27 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 9f3bb61..a36ebda 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -180,20 +180,6 @@
> # define ATMCI_PDC_CONNECTED 1
> #endif
>
> -/*
> - * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
> - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
> - *
> - * This can be done by finding most significant bit set.
> - */
> -static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
> -{
> - if (maxburst > 1)
> - return fls(maxburst) - 2;
> - else
> - return 0;
> -}
> -
> #define AUTOSUSPEND_DELAY 50
>
> #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
> @@ -732,6 +718,29 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host)
> return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
> }
>
> +/*
> + * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
> + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
> + * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2,
> + * 8 -> 3, 16 -> 4.
> + *
> + * This can be done by finding most significant bit set.
> + */
> +static inline unsigned int atmci_convert_chksize(struct atmel_mci *host,
> + unsigned int maxburst)
> +{
> + unsigned int version = atmci_get_version(host);
> + unsigned int offset = 2;
> +
> + if (version >= 0x600)
> + offset = 1;
> +
> + if (maxburst > 1)
> + return fls(maxburst) - offset;
> + else
> + return 0;
> +}
> +
> static void atmci_timeout_timer(unsigned long data)
> {
> struct atmel_mci *host;
> @@ -1182,11 +1191,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
> if (data->flags & MMC_DATA_READ) {
> direction = DMA_FROM_DEVICE;
> host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
> - maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
> + maxburst = atmci_convert_chksize(host,
> + host->dma_conf.src_maxburst);
> } else {
> direction = DMA_TO_DEVICE;
> host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
> - maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
> + maxburst = atmci_convert_chksize(host,
> + host->dma_conf.dst_maxburst);
> }
>
> if (host->caps.has_dma_conf_reg)
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/