[PATCH] net: fec: fix enet_out clock handling

From: Lothar WaÃmann
Date: Fri Nov 27 2015 - 09:00:27 EST


When ENET_OUT is being used as reference clock for an external PHY,
the clock must not be disabled while the PHY is active. Otherwise the
PHY may lose its internal state and require a reset to become
functional again.

A symptom for this bug is a network interface that constantly toggles
between UP and DOWN state:
fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
fec 800f0000.ethernet eth0: Link is Down
fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
fec 800f0000.ethernet eth0: Link is Down
[...]

Signed-off-by: Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/freescale/fec_main.c | 34 +++++++++++++------------------
1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index d2328fc..d9df4c5 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1857,11 +1857,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
ret = clk_prepare_enable(fep->clk_ahb);
if (ret)
return ret;
- if (fep->clk_enet_out) {
- ret = clk_prepare_enable(fep->clk_enet_out);
- if (ret)
- goto failed_clk_enet_out;
- }
if (fep->clk_ptp) {
mutex_lock(&fep->ptp_clk_mutex);
ret = clk_prepare_enable(fep->clk_ptp);
@@ -1873,35 +1868,26 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
}
mutex_unlock(&fep->ptp_clk_mutex);
}
- if (fep->clk_ref) {
- ret = clk_prepare_enable(fep->clk_ref);
- if (ret)
- goto failed_clk_ref;
- }
+ ret = clk_prepare_enable(fep->clk_ref);
+ if (ret)
+ goto failed_clk_ref;
} else {
clk_disable_unprepare(fep->clk_ahb);
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
if (fep->clk_ptp) {
mutex_lock(&fep->ptp_clk_mutex);
clk_disable_unprepare(fep->clk_ptp);
fep->ptp_clk_on = false;
mutex_unlock(&fep->ptp_clk_mutex);
}
- if (fep->clk_ref)
- clk_disable_unprepare(fep->clk_ref);
+ clk_disable_unprepare(fep->clk_ref);
}

return 0;

failed_clk_ref:
- if (fep->clk_ref)
- clk_disable_unprepare(fep->clk_ref);
+ clk_disable_unprepare(fep->clk_ref);
failed_clk_ptp:
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
-failed_clk_enet_out:
- clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ahb);

return ret;
}
@@ -3425,6 +3411,10 @@ fec_probe(struct platform_device *pdev)
if (ret)
goto failed_clk;

+ ret = clk_prepare_enable(fep->clk_enet_out);
+ if (ret)
+ goto failed_clk_enet_out;
+
ret = clk_prepare_enable(fep->clk_ipg);
if (ret)
goto failed_clk_ipg;
@@ -3509,6 +3499,8 @@ failed_init:
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
failed_regulator:
+ clk_disable_unprepare(fep->clk_enet_out);
+failed_clk_enet_out:
clk_disable_unprepare(fep->clk_ipg);
failed_clk_ipg:
fec_enet_clk_enable(ndev, false);
@@ -3531,6 +3523,8 @@ fec_drv_remove(struct platform_device *pdev)
fec_ptp_stop(pdev);
unregister_netdev(ndev);
fec_enet_mii_remove(fep);
+ fec_enet_clk_enable(ndev, false);
+ clk_disable_unprepare(fep->clk_enet_out);
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
of_node_put(fep->phy_node);
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/