[PATCH] vgaarb: fix signal handling in vga_get()
From: Kirill A. Shutemov
Date: Sun Nov 29 2015 - 21:19:22 EST
There are few defects in vga_get() related to signal hadning:
- we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE
case;
- if we found pending signal we must remove ourself from wait queue
and change task state back to running;
- -ERESTARTSYS is more appropriate, I guess.
Signed-off-by: Kirill A. Shutemov <kirill@xxxxxxxxxxxxx>
---
Alex, I try to get KVM with VGA passthrough working properly. I have i915
(HD 4600) on the host and GTX 580 for the guest. The guest GPU is not
capabale of EFI, so I have to use x-vga=on. It's kinda work with your
patch for i915.enable_hd_vgaarb=1. But guest refuse to initialize the GPU
after KVM was not shut down correctly, resulting in host crash like this:
BUG: unable to handle kernel paging request at ffff880870187ed8
IP: [<ffff880870187ed8>] 0xffff880870187ed8
PGD 2129067 PUD 80000008400001e3
Oops: 0011 [#1] PREEMPT SMP
Modules linked in: iwlmvm iwlwifi
CPU: 6 PID: 3983 Comm: qemu-system-x86 Not tainted 4.3.0-gentoo #6
Hardware name: Gigabyte Technology Co., Ltd. Z87X-UD7 TH/Z87X-UD7 TH-CF, BIOS F5a 06/12/2014
task: ffff88087a910000 ti: ffff8808632c0000 task.ti: ffff8808632c0000
RIP: 0010:[<ffff880870187ed8>] [<ffff880870187ed8>] 0xffff880870187ed8
RSP: 0018:ffff8808632c3d08 EFLAGS: 00010006
RAX: ffff880870187db0 RBX: 0000000070187f58 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff880870187db0
RBP: ffff8808632c3d48 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000103c0 R11: 0000000000000293 R12: ffffffff81ea03c8
R13: ffffffff8104c7cb R14: 0000000000000000 R15: 0000000000000003
FS: 00007f984f9b2700(0000) GS:ffff88089f380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff880870187ed8 CR3: 00000008645f8000 CR4: 00000000001426e0
Stack:
ffffffff810cc83d 00000000632c3d28 0000000000000000 ffffffff81ea03c0
0000000000000046 0000000000000003 0000000000000000 0000000000000000
ffff8808632c3d80 ffffffff810cca44 ffff88087af63800 0000000000000286
Call Trace:
[<ffffffff810cc83d>] ? __wake_up_common+0x4d/0x80
[<ffffffff810cca44>] __wake_up+0x34/0x50
[<ffffffff815d99e3>] __vga_put+0x73/0xd0
[<ffffffff815d9db4>] vga_put+0x54/0x80
[<ffffffff8169d042>] vfio_pci_vga_rw+0x1d2/0x220
[<ffffffff8169a7f3>] vfio_pci_rw+0x33/0x60
[<ffffffff8169abf7>] vfio_pci_write+0x17/0x20
[<ffffffff816966a6>] vfio_device_fops_write+0x26/0x30
[<ffffffff811a4b23>] __vfs_write+0x23/0xe0
[<ffffffff811a4a53>] ? __vfs_read+0x23/0xd0
[<ffffffff811b6e35>] ? do_vfs_ioctl+0x2b5/0x490
[<ffffffff811a5194>] vfs_write+0xa4/0x190
[<ffffffff811a5fa6>] SyS_pwrite64+0x66/0xa0
[<ffffffff819a17d7>] entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 88 ff ff e0 7e 18 70 08 88 ff ff 00 8c 57 76 08 88 ff ff 20 7f 18 70 08 88 ff ff 08 7f 18 70 08 88 ff ff 94 51 1a 81 ff ff ff ff <09> 00 00 00 00 00 00 00 01 8c 57 76 08 88 ff ff 00 8c 57 76 08
RIP [<ffff880870187ed8>] 0xffff880870187ed8
RSP <ffff8808632c3d08>
CR2: ffff880870187ed8
The patch fixes the crash, but doesn't help with getting GPU in guest
working again.
Any ideas?
---
drivers/gpu/vga/vgaarb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 3166e4bc4eb6..9abcaa53bd25 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -395,8 +395,10 @@ int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible)
set_current_state(interruptible ?
TASK_INTERRUPTIBLE :
TASK_UNINTERRUPTIBLE);
- if (signal_pending(current)) {
- rc = -EINTR;
+ if (interruptible && signal_pending(current)) {
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&vga_wait_queue, &wait);
+ rc = -ERESTARTSYS;
break;
}
schedule();
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/