Hello Dave,
Am 17.11.2015 um 22:29 schrieb Dave Gerlach:
Hi,
On 11/17/2015 02:24 AM, Heiko Schocher wrote:
add support for the am335x based shc board.
UART: 0-2 and 4
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0 @ 26 MHz
OMAP SD/MMC: 1 @ 26 MHz
I2C: at24 eeprom, pcf8563
USB: USB1 (host)
Signed-off-by: Heiko Schocher <hs@xxxxxxx>
---
The following patches are needed to get all working
for the shc board:
- disable clkout on pcf8563
accepted.
http://www.spinics.net/lists/devicetree/msg98542.html
- leds: leds-gpio: add shutdown function
accepted.
https://lkml.org/lkml/2015/10/13/169
- net: phy: smsc: disable energy detect mode
accepted
[PATCH v2 2/2] net: phy: smsc: disable energy detect mode
https://lkml.org/lkml/2015/10/17/2
[PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
https://lkml.org/lkml/2015/10/17/4
- ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
@Dave: What is the current state of this patch?
I have the same problem here on this am335x based board
A different approach is being taken for resolving the issue of rtc hwmod on am43x epos evm [1],
which is what I was attempting to solve with the patch you have linked. We decided to avoid changing
omap_hwmod code and I haven't been pursuing the ti,no-init flag anymore.
Maybe I overlook something, but I cannot see, how [1] solves the RTC
hwmod problem on am335x SoC based boards. Not all boards have this problem,
so the RTC hwmod cannot be disabled for all am335x boards ...
It must be somehow configurable for boards ... I have am335x boards
which use the rtc from the SoC
Regards,
Dave
[1] http://www.spinics.net/lists/linux-omap/msg121987.html
bye,
Heiko