Re: [RFC PATCH 73/71] ncr5380: Use runtime register mapping

From: Finn Thain
Date: Mon Nov 30 2015 - 06:50:41 EST

Next message: Finn Thain: "Re: [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A"
Previous message: martin . wilck: "[PATCH v2] base/platform: return success when probe function is NULL"
In reply to: Ondrej Zary: "[RFC PATCH 73/71] ncr5380: Use runtime register mapping"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, 29 Nov 2015, Ondrej Zary wrote:

> Convert compile-time C400_ register mapping to runtime mapping.
> This removes the weird negative register offsets and allows adding
> additional mappings.
>
> Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/scsi/NCR5380.h | 13 +---------
> drivers/scsi/g_NCR5380.c | 61 ++++++++++++++++++++++++++--------------------
> drivers/scsi/g_NCR5380.h | 12 ++++++---
> 3 files changed, 43 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
> index 36779df..0d8ec43 100644
> --- a/drivers/scsi/NCR5380.h
> +++ b/drivers/scsi/NCR5380.h
> @@ -163,8 +163,7 @@
> /* Write any value to this register to start an ini mode DMA receive */
> #define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
>
> -#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
> -
> +/* C400_CONTROL_STATUS_REG */

That symbol is removed by this patch. No need for abbreviations. How about

/* NCR 53C400 and 53C400A Control Status Register bits: */

> #define CSR_RESET 0x80 /* wo Resets 53c400 */
> #define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
> #define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
> @@ -181,16 +180,6 @@
> #define CSR_BASE CSR_53C80_INTR
> #endif
>
> -/* Number of 128-byte blocks to be transferred */
> -#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
> -
> -/* Resume transfer after disconnect */
> -#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
> -
> -/* Access to host buffer stack */
> -#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
> -
> -
> /* Note : PHASE_* macros are based on the values of the STATUS register */
> #define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
>
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index a9a237f..ce444da 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> };
> int flags;
> struct Scsi_Host *instance;
> + struct NCR5380_hostdata *hostdata;
> #ifdef SCSI_G_NCR5380_MEM
> unsigned long base;
> void __iomem *iomem;
> @@ -395,6 +396,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
> if (instance == NULL)
> goto out_release;
> + hostdata = shost_priv(instance);
>
> #ifndef SCSI_G_NCR5380_MEM
> instance->io_port = overrides[current_override].NCR5380_map_name;
> @@ -404,18 +406,27 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
> * On NCR53C400 boards, NCR5380 registers are mapped 8 past
> * the base address.
> */
> - if (overrides[current_override].board == BOARD_NCR53C400)
> + if (overrides[current_override].board == BOARD_NCR53C400) {
> instance->io_port += 8;
> + hostdata->c400_ctl_status = 0;
> + hostdata->c400_blk_cnt = 1;
> + hostdata->c400_host_buf = 4;
> + }
> #else
> instance->base = overrides[current_override].NCR5380_map_name;
> - ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
> + hostdata->iomem = iomem;
> + if (overrides[current_override].board == BOARD_NCR53C400) {
> + hostdata->c400_ctl_status = 0x100;
> + hostdata->c400_blk_cnt = 0x101;
> + hostdata->c400_host_buf = 0x104;
> + }
> #endif
>
> if (NCR5380_init(instance, flags))
> goto out_unregister;
>
> if (overrides[current_override].board == BOARD_NCR53C400)
> - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
> + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
>
> NCR5380_maybe_reset_bus(instance);
>
> @@ -523,30 +534,28 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
>
> static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
> {
> -#ifdef SCSI_G_NCR5380_MEM
> struct NCR5380_hostdata *hostdata = shost_priv(instance);
> -#endif
> int blocks = len / 128;
> int start = 0;
> int bl;
>
> - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
> - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
> + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
> + NCR5380_write(hostdata->c400_blk_cnt, blocks);
> while (1) {
> - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
> + if ((bl = NCR5380_read(hostdata->c400_blk_cnt)) == 0) {
> break;
> }
> - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
> + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
> printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
> return -1;
> }
> - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
> + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY);
>
> #ifndef SCSI_G_NCR5380_MEM
> {
> int i;
> for (i = 0; i < 128; i++)
> - dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
> + dst[start + i] = NCR5380_read(hostdata->c400_host_buf);
> }
> #else
> /* implies SCSI_G_NCR5380_MEM */
> @@ -558,7 +567,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
> }
>
> if (blocks) {
> - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
> + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
> {
> // FIXME - no timeout
> }
> @@ -567,7 +576,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
> {
> int i;
> for (i = 0; i < 128; i++)
> - dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
> + dst[start + i] = NCR5380_read(hostdata->c400_host_buf);
> }
> #else
> /* implies SCSI_G_NCR5380_MEM */
> @@ -578,7 +587,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
> blocks--;
> }
>
> - if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
> + if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
> printk("53C400r: no 53C80 gated irq after transfer");
>
> #if 0
> @@ -586,7 +595,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
> * DON'T DO THIS - THEY NEVER ARRIVE!
> */
> printk("53C400r: Waiting for 53C80 registers\n");
> - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
> + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
> ;
> #endif
> if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
> @@ -607,31 +616,29 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
>
> static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
> {
> -#ifdef SCSI_G_NCR5380_MEM
> struct NCR5380_hostdata *hostdata = shost_priv(instance);
> -#endif
> int blocks = len / 128;
> int start = 0;
> int bl;
> int i;
>
> - NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
> - NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
> + NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
> + NCR5380_write(hostdata->c400_blk_cnt, blocks);
> while (1) {
> - if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
> + if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
> printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
> return -1;
> }
>
> - if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
> + if ((bl = NCR5380_read(hostdata->c400_blk_cnt)) == 0) {
> break;
> }
> - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
> + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
> ; // FIXME - timeout
> #ifndef SCSI_G_NCR5380_MEM
> {
> for (i = 0; i < 128; i++)
> - NCR5380_write(C400_HOST_BUFFER, src[start + i]);
> + NCR5380_write(hostdata->c400_host_buf, src[start + i]);
> }
> #else
> /* implies SCSI_G_NCR5380_MEM */
> @@ -642,13 +649,13 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
> blocks--;
> }
> if (blocks) {
> - while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
> + while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
> ; // FIXME - no timeout
>
> #ifndef SCSI_G_NCR5380_MEM
> {
> for (i = 0; i < 128; i++)
> - NCR5380_write(C400_HOST_BUFFER, src[start + i]);
> + NCR5380_write(hostdata->c400_host_buf, src[start + i]);
> }
> #else
> /* implies SCSI_G_NCR5380_MEM */
> @@ -661,7 +668,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
>
> #if 0
> printk("53C400w: waiting for registers to be available\n");
> - THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
> + THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
> printk("53C400w: Got em\n");
> #endif
>
> @@ -669,7 +676,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
> /* All documentation says to check for this. Maybe my hardware is too
> * fast. Waiting for it seems to work fine! KLL
> */
> - while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
> + while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
> ; // FIXME - no timeout
>
> /*
> diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
> index fd201e9..633edd0 100644
> --- a/drivers/scsi/g_NCR5380.h
> +++ b/drivers/scsi/g_NCR5380.h
> @@ -29,7 +29,6 @@
>
> #define NCR5380_map_type int
> #define NCR5380_map_name port
> -#define NCR53C400_register_offset 0
>
> #ifdef CONFIG_SCSI_GENERIC_NCR53C400
> #define NCR5380_region_size 16
> @@ -42,7 +41,10 @@
> #define NCR5380_write(reg, value) \
> outb(value, instance->io_port + (reg))
>
> -#define NCR5380_implementation_fields /* none */
> +#define NCR5380_implementation_fields \
> + int c400_ctl_status;\
> + int c400_blk_cnt;\
> + int c400_host_buf;
>
> #else
> /* therefore SCSI_G_NCR5380_MEM */

A space before the backslash would be more consistent.

> @@ -50,7 +52,6 @@
>
> #define NCR5380_map_type unsigned long
> #define NCR5380_map_name base
> -#define NCR53C400_register_offset 0x108
> #define NCR53C400_mem_base 0x3880
> #define NCR53C400_host_buffer 0x3900
> #define NCR5380_region_size 0x3a00
> @@ -63,7 +64,10 @@
> NCR53C400_mem_base + (reg))
>
> #define NCR5380_implementation_fields \
> - void __iomem *iomem;
> + void __iomem *iomem;\
> + int c400_ctl_status;\
> + int c400_blk_cnt;\
> + int c400_host_buf;
>
> #endif
>

Same here.

--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Finn Thain: "Re: [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A"
Previous message: martin . wilck: "[PATCH v2] base/platform: return success when probe function is NULL"
In reply to: Ondrej Zary: "[RFC PATCH 73/71] ncr5380: Use runtime register mapping"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]