Re: [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A

[Ondrej Zary]

On Monday 30 November 2015, Finn Thain wrote:
> 
> On Sun, 29 Nov 2015, Ondrej Zary wrote:
> 
> > Add I/O register mapping for NCR53C400A and enable PDMA mode to
> > improve performance and fix non-working IRQ.
> > 
> 
> Is CONFIG_SCSI_GENERIC_NCR53C400 is still needed? Can the driver be fully 
> configured at runtime now?

Things depending on CONFIG_SCSI_GENERIC_NCR53C400:

#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define PSEUDO_DMA
#endif

Defining PSEUDO_DMA should not break anything, just makes code bigger a bit. We can probably just define it always in g_NCR5380.c.


This looks weird. I don't have any card with a BIOS to test.
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#else
#define NCR5380_BIOSPARAM NULL
#endif


This looks very wrong and should be done at runtime:
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
#else
#define NCR5380_region_size 8
#endif


> > Tested with HP C2502 (and user-space enabler).
> > 
> 
> It would be nice if the enabler was documented.  
> Documentation/scsi/g_NCR5380.txt might be a good place for that. That file 
> could perhaps be updated (?) Certainly obsolete and misleading information 
> should be removed if you see any.
 
I'll integrate the enabler into the driver. It's like "wakeup sequence for the NCR53C400A and DTC3181E */" in g_NCR5380.c, only the magic numbers are different.

-- 
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/