[PATCH 0/2] regulator: Add support for parallel regulators

From: Maxime Ripard
Date: Mon Nov 30 2015 - 10:29:29 EST


Hi,

On some boards, devices consuming a lot of power cannot use a single
regulator, but few of them in parallel to spread the consumption.

In such a case, we must ensure that all these regulators are kept in
sync.

Since this is something that is totally board specific, it should
obviously not be handle by each and every customer drivers that might
be driving a device wired this way on a particular board.

Instead, we implemented a regulator driver that just aggregates
several parent regulators and just forwards the regulators calls to
them.

Let me know what you think,
Maxime


Maxime Ripard (2):
regulator: Add coupled regulator
ARM: sunxi: chip: Add Wifi chip

arch/arm/boot/dts/sun5i-r8-chip.dts | 44 ++++-
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/coupled-voltage-regulator.c | 241 ++++++++++++++++++++++++++
4 files changed, 292 insertions(+), 1 deletion(-)
create mode 100644 drivers/regulator/coupled-voltage-regulator.c

--
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/