[PATCH v2] usb: ehci: ohci: use true/false for bool

[Geyslan G. Bem]

When declaring/initializing bool use true instead of 1. If it's false,
there's no need to explicit initialize it, once it's default.

Caught by coccinelle.

Signed-off-by: Geyslan G. Bem <geyslan@xxxxxxxxx>
---
 drivers/usb/host/ehci-hcd.c | 2 +-
 drivers/usb/host/ohci-hcd.c | 4 ++--
 drivers/usb/host/u132-hcd.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 48c92bf..1b01967 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -98,7 +98,7 @@ module_param (park, uint, S_IRUGO);
 MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
 
 /* for flakey hardware, ignore overcurrent indicators */
-static bool ignore_oc = 0;
+static bool ignore_oc;
 module_param (ignore_oc, bool, S_IRUGO);
 MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 760cb57..5547dbf 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -99,13 +99,13 @@ static void io_watchdog_func(unsigned long _ohci);
 
 
 /* Some boards misreport power switching/overcurrent */
-static bool distrust_firmware = 1;
+static bool distrust_firmware = true;
 module_param (distrust_firmware, bool, 0);
 MODULE_PARM_DESC (distrust_firmware,
 	"true to distrust firmware power/overcurrent setup");
 
 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
-static bool no_handshake = 0;
+static bool no_handshake;
 module_param (no_handshake, bool, 0);
 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 692ccc6..05c85c7 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -73,7 +73,7 @@ MODULE_LICENSE("GPL");
 #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
 INT_MODULE_PARM(testing, 0);
 /* Some boards misreport power switching/overcurrent*/
-static bool distrust_firmware = 1;
+static bool distrust_firmware = true;
 module_param(distrust_firmware, bool, 0);
 MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
 	"t setup");
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/