Re: SoCFPGA ethernet broken

[Dinh Nguyen]

Hi Andrew,

On Fri, 4 Dec 2015, Andrew Lunn wrote:

> On Fri, Dec 04, 2015 at 02:10:50AM +0100, Andrew Lunn wrote:
> > > > FWIW: My initial patch to address the failure worked with the original DTB.
> > > 
> > > Can I ask what patch are you referring to? I was sidetracked for a while
> > > on this issue, but I still see it failing as of v4.4-rc3. I'll try to
> > > get back to debugging this.
> > 
> > Hi Dinh
> > 
> > There are two different patches:
> > 
> > https://lkml.org/lkml/2015/10/16/669
> > 
> > and
> > 
> > https://www.mail-archive.com/netdev@xxxxxxxxxxxxxxx/msg83183.html
> > 
> > Although the first one works, it keeps searching up and up and up, so
> > you could in theory put the phy properties a lot higher than the MAC.
> > 
> > The second patch restricts where it looks for the phy properties to
> > only the MAC. But it does not work. We would like to understand why it
> > does not work.
> 
> Hi Dinh
> 
> Please could you run this patch and let us know what it outputs.
> 
> Thanks
> 	Andrew
> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index cf6312fafea5..d7ddc0bb0e7f 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -26,6 +26,7 @@
>  #include <linux/module.h>
>  #include <linux/phy.h>
>  #include <linux/micrel_phy.h>
> +#include <linux/netdevice.h>
>  #include <linux/of.h>
>  #include <linux/clk.h>
>  
> @@ -339,9 +340,19 @@ static int ksz9021_config_init(struct phy_device *phydev)
>  {
>  	const struct device *dev = &phydev->dev;
>  	const struct device_node *of_node = dev->of_node;
> +	const struct device *dev_walker;
>  
> -	if (!of_node && dev->parent->of_node)
> -		of_node = dev->parent->of_node;
> +	dev_info(dev, "dev->parent: %s\n", dev_name(dev->parent));
> +	dev_info(dev, "phydev->attached_dev->dev: %s\n", dev_name(&phydev->attached_dev->dev));
> +
> +	dev_walker = &phydev->dev;
> +	do {
> +		of_node = dev_walker->of_node;
> +		dev_info(dev, "walking: %s %p\n",
> +			 dev_name(dev_walker), of_node);
> +		dev_walker = dev_walker->parent;
> +
> +	} while (!of_node && dev_walker);
>  
>  	if (of_node) {
>  		ksz9021_load_values_from_of(phydev, of_node,
> 

Here is the output from the above patch:

[    1.042049] mmc0: new high speed SDHC card at address aaaa
[    1.048017] mmcblk0: mmc0:aaaa SU32G 29.7 GiB
[    1.053506]  mmcblk0: p1 p2 p3 p4
[    1.057708] dwc2 ffb40000.usb: Configuration mismatch. Forcing host mode
[    1.064418] dwc2 ffb40000.usb: no platform data or transceiver defined
[    1.070966] Micrel KSZ9021 Gigabit PHY stmmac-0:04: dev->parent: stmmac-0
[    1.077746] Micrel KSZ9021 Gigabit PHY stmmac-0:04: phydev->attached_dev->dev: eth0
[    1.085389] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: stmmac-0:04   (null)
[    1.092841] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: stmmac-0   (null)
[    1.100042] Micrel KSZ9021 Gigabit PHY stmmac-0:04: walking: ff702000.ethernet ef9f3538
[    1.133638] Sending DHCP requests ..
[    5.104138] socfpga-dwmac ff702000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

BR,
Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/