[PATCH v3 04/10] ARM: dts: Exynos5420: add CPU OPP and regulator supply property
From: Bartlomiej Zolnierkiewicz
Date: Fri Dec 04 2015 - 12:32:22 EST
From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
For Exynos5420 platforms, add CPU operating points and CPU
regulator supply properties for migrating from Exynos specific
cpufreq driver to using generic cpufreq driver.
Changes by Bartlomiej:
- split Exynos5420 support from the original patch
Changes by Ben Gamari:
- Port to operating-points-v2
Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Cc: Andreas Faerber <afaerber@xxxxxxx>
Cc: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Signed-off-by: Ben Gamari <ben@xxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 48a0a55..f8f70a5 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -50,6 +50,116 @@
usbdrdphy1 = &usbdrd_phy1;
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp00@1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp01@1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp02@1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1175000>;
+ clock-latency-ns = <140000>;
+ };
+ opp03@1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <140000>;
+ };
+ opp04@1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp05@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp06@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <140000>;
+ };
+ opp07@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp08@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = < 987500>;
+ clock-latency-ns = <140000>;
+ };
+ opp09@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = < 962500>;
+ clock-latency-ns = <140000>;
+ };
+ opp10@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = < 937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp11@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = < 912500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
+ cpu1_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp00@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1275000>;
+ clock-latency-ns = <140000>;
+ };
+ opp01@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp02@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1162500>;
+ clock-latency-ns = <140000>;
+ };
+ opp03@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp04@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp05@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp06@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp07@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -58,8 +168,11 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu-cluster.0";
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@1 {
@@ -68,6 +181,7 @@
reg = <0x1>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu2: cpu@2 {
@@ -76,6 +190,7 @@
reg = <0x2>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu3: cpu@3 {
@@ -84,14 +199,18 @@
reg = <0x3>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
+ clocks = <&clock CLK_KFC_CLK>;
+ clock-names = "cpu-cluster.1";
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu5: cpu@101 {
@@ -100,6 +219,7 @@
reg = <0x101>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu6: cpu@102 {
@@ -108,6 +228,7 @@
reg = <0x102>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
cpu7: cpu@103 {
@@ -116,6 +237,7 @@
reg = <0x103>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
+ operating-points-v2 = <&cpu1_opp_table>;
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/