[PATCH v2 69/72] ncr5380: Merge changes from atari_NCR5380.c
From: Finn Thain
Date: Sat Dec 05 2015 - 22:47:35 EST
In the past, NCR5380.c was overlooked by those working on atari_NCR5380.c
and this caused needless divergence. All of the changes in this patch were
taken from atari_NCR5380.c.
This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 155 +++++++++++++++++++++++++++----------------------
1 file changed, 87 insertions(+), 68 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-12-06 12:31:16.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-12-06 12:31:19.000000000 +1100
@@ -174,7 +174,7 @@ static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
/**
- * initialize_SCp - init the scsi pointer field
+ * initialize_SCp - init the scsi pointer field
* @cmd: command block to set up
*
* Set up the internal fields in the SCSI command.
@@ -264,19 +264,6 @@ static inline int NCR5380_poll_politely(
reg, bit, val, wait);
}
-static struct {
- unsigned char value;
- const char *name;
-} phases[] __maybe_unused = {
- {PHASE_DATAOUT, "DATAOUT"},
- {PHASE_DATAIN, "DATAIN"},
- {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"},
- {PHASE_MSGOUT, "MSGOUT"},
- {PHASE_MSGIN, "MSGIN"},
- {PHASE_UNKNOWN, "UNKNOWN"}
-};
-
#if NDEBUG
static struct {
unsigned char mask;
@@ -311,6 +298,7 @@ mrs[] = {
{MR_TARGET, "MODE TARGET"},
{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
{MR_MONITOR_BSY, "MODE MONITOR BSY"},
{MR_DMA_MODE, "MODE DMA"},
{MR_ARBITRATE, "MODE ARBITRATION"},
@@ -318,8 +306,8 @@ mrs[] = {
};
/**
- * NCR5380_print - print scsi bus signals
- * @instance: adapter state to dump
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
* Print the SCSI bus signals for debugging purposes
*/
@@ -353,9 +341,21 @@ static void NCR5380_print(struct Scsi_Ho
printk("\n");
}
+static struct {
+ unsigned char value;
+ const char *name;
+} phases[] = {
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
+ {PHASE_UNKNOWN, "UNKNOWN"}
+};
/**
- * NCR5380_print_phase - show SCSI phase
+ * NCR5380_print_phase - show SCSI phase
* @instance: adapter to dump
*
* Print the current SCSI phase for debugging purposes
@@ -370,7 +370,9 @@ static void NCR5380_print_phase(struct S
if (!(status & SR_REQ))
shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
+ for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
+ (phases[i].value != (status & PHASE_MASK)); ++i)
+ ;
shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
@@ -511,7 +513,7 @@ static int __maybe_unused NCR5380_write_
}
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
+ struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
@@ -522,7 +524,7 @@ static int __maybe_unused NCR5380_show_i
#endif
/**
- * NCR5380_init - initialise an NCR5380
+ * NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
* @flags: control flags
*
@@ -530,7 +532,7 @@ static int __maybe_unused NCR5380_show_i
* with flags OR'd into the initial flags value.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * set correctly. I don't care about the irq and other fields.
*
* Returns 0 for success
*/
@@ -541,10 +543,9 @@ static int NCR5380_init(struct Scsi_Host
int i;
unsigned long deadline;
- if(in_interrupt())
- printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
-
+ hostdata->host = instance;
hostdata->id_mask = 1 << instance->this_id;
+ hostdata->id_higher_mask = 0;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
if (i > hostdata->id_mask)
hostdata->id_higher_mask |= i;
@@ -569,8 +570,6 @@ static int NCR5380_init(struct Scsi_Host
if (!hostdata->work_q)
return -ENOMEM;
- hostdata->host = instance;
-
prepare_info(instance);
#ifndef REAL_DMA
@@ -647,8 +646,10 @@ static int NCR5380_maybe_reset_bus(struc
}
/**
- * NCR5380_exit - remove an NCR5380
+ * NCR5380_exit - remove an NCR5380
* @instance: adapter to remove
+ *
+ * Assumes that no more work can be queued (e.g. by NCR5380_intr).
*/
static void NCR5380_exit(struct Scsi_Host *instance)
@@ -713,7 +714,7 @@ static int NCR5380_queue_command(struct
cmd->scsi_done(cmd);
return 0;
}
-#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
+#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
cmd->result = 0;
@@ -800,7 +801,7 @@ static void requeue_cmd(struct Scsi_Host
}
/**
- * NCR5380_main - NCR state machines
+ * NCR5380_main - NCR state machines
*
* NCR5380_main is a coroutine that runs as long as more work can
* be done on the NCR5380 host adapters in a system. Both
@@ -1066,7 +1067,9 @@ static struct scsi_cmnd *NCR5380_select(
udelay(3);
/* Check for lost arbitration */
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
+ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
+ (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
@@ -1132,7 +1135,7 @@ static struct scsi_cmnd *NCR5380_select(
* The initiator shall then wait at least two deskew delays and release
* the BSY signal.
*/
- udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
+ udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
@@ -1269,7 +1272,7 @@ out:
* bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
+ * maximum number of bytes, 0 if all bytes are transferred or exit
* is in same phase.
*
* Also, *phase, *count, *data are modified in place.
@@ -1283,7 +1286,10 @@ out:
* counts, we will always do a pseudo DMA or DMA transfer.
*/
-static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
+static int NCR5380_transfer_pio(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
@@ -1294,7 +1300,7 @@ static int NCR5380_transfer_pio(struct S
* REGISTER match the STATUS REGISTER
*/
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
do {
/*
@@ -1313,6 +1319,7 @@ static int NCR5380_transfer_pio(struct S
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
+
/* Do actual transfer from SCSI bus to / from memory */
if (!(p & SR_IO))
NCR5380_write(OUTPUT_DATA_REG, *d);
@@ -1450,12 +1457,14 @@ static int do_abort(struct Scsi_Host *in
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
if (tmp != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
if (rc < 0)
goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
+
tmp = ABORT;
msgptr = &tmp;
len = 1;
@@ -1494,7 +1503,11 @@ timeout:
*/
-static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
+static int NCR5380_transfer_dma(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
register int c = *count;
register unsigned char p = *phase;
register unsigned char *d = *data;
@@ -1505,8 +1518,6 @@ static int NCR5380_transfer_dma(struct S
unsigned char saved_data = 0, overrun = 0, residue;
#endif
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
@@ -1736,7 +1747,8 @@ static int NCR5380_transfer_dma(struct S
* to recover from an unexpected bus free condition.
*/
-static void NCR5380_information_transfer(struct Scsi_Host *instance) {
+static void NCR5380_information_transfer(struct Scsi_Host *instance)
+{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
@@ -1763,11 +1775,13 @@ static void NCR5380_information_transfer
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
sink = 0;
continue;
}
+
switch (phase) {
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
@@ -1793,6 +1807,7 @@ static void NCR5380_information_transfer
cmd->SCp.this_residual,
cmd->SCp.buffers_residual);
}
+
/*
* The preferred transfer method is going to be
* PSEUDO-DMA for systems that are strictly PIO,
@@ -1811,13 +1826,15 @@ static void NCR5380_information_transfer
if (transfersize) {
len = transfersize;
- if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) {
+ if (NCR5380_transfer_dma(instance, &phase,
+ &len, (unsigned char **)&cmd->SCp.ptr)) {
/*
- * If the watchdog timer fires, all future accesses to this
- * device will use the polled-IO.
+ * If the watchdog timer fires, all future
+ * accesses to this device will use the
+ * polled-IO.
*/
scmd_printk(KERN_INFO, cmd,
- "switching to slow handshake\n");
+ "switching to slow handshake\n");
cmd->device->borken = 1;
sink = 1;
do_abort(instance);
@@ -1893,25 +1910,24 @@ static void NCR5380_information_transfer
break;
}
break;
- case DISCONNECT:{
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- hostdata->connected = NULL;
- list_add(&ncmd->list, &hostdata->disconnected);
- dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
- instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
- cmd, scmd_id(cmd), cmd->device->lun);
+ case DISCONNECT:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ hostdata->connected = NULL;
+ list_add(&ncmd->list, &hostdata->disconnected);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
+ * arbitration can resume.
+ */
+ NCR5380_write(TARGET_COMMAND_REG, 0);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return;
- }
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return;
/*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
* operation, in violation of the SCSI spec so we can safely
@@ -2001,15 +2017,17 @@ static void NCR5380_information_transfer
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown message %02x\n",tmp);
+ "rejecting unknown message %02x\n",
+ tmp);
else
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]);
+ "rejecting unknown extended message code %02x, length %d\n",
+ extended_msg[1], extended_msg[0]);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
break;
- } /* switch (tmp) */
+ } /* switch (tmp) */
break;
case PHASE_MSGOUT:
len = 1;
@@ -2044,7 +2062,7 @@ static void NCR5380_information_transfer
default:
shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
- } /* switch(phase) */
+ } /* switch(phase) */
} else {
spin_unlock_irq(&hostdata->lock);
NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
@@ -2063,7 +2081,8 @@ static void NCR5380_information_transfer
* Inputs : instance - this instance of the NCR5380.
*/
-static void NCR5380_reselect(struct Scsi_Host *instance) {
+static void NCR5380_reselect(struct Scsi_Host *instance)
+{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun, phase;
@@ -2160,8 +2179,8 @@ static void NCR5380_reselect(struct Scsi
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
target_mask, lun);
/*
- * Since we have an established nexus that we can't do anything with,
- * we must abort it.
+ * Since we have an established nexus that we can't do anything
+ * with, we must abort it.
*/
do_abort(instance);
return;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/