Re: [PATCH v9 3/4] irqchip:create irq domain for each mbigen device

From: Marc Zyngier
Date: Mon Dec 07 2015 - 03:26:25 EST

On Sun, 6 Dec 2015 15:53:20 -0500
majun <majun258@xxxxxxxxxx> wrote:

> Hi Marc:
>
> On 2015/12/3 11:25, Marc Zyngier wrote:
> > On 23/11/15 03:15, MaJun wrote:
> >> From: Ma Jun <majun258@xxxxxxxxxx>
> >>
> >> For peripheral devices which connect to mbigen,mbigen is a interrupt
> >> controller. So, we create irq domain for each mbigen device and add
> >> mbigen irq domain into irq hierarchy structure.
> >>
> >> Signed-off-by: Ma Jun <majun258@xxxxxxxxxx>
> >> ---
> >> drivers/irqchip/irq-mbigen.c | 119 ++++++++++++++++++++++++++++++++++++++++++
> >> 1 files changed, 119 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
> >> index 9f036c2..81ae61f 100644
> >> --- a/drivers/irqchip/irq-mbigen.c
> >> +++ b/drivers/irqchip/irq-mbigen.c
> >> @@ -16,13 +16,36 @@
> >> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> >> */
> >>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/irqchip.h>
> >> #include <linux/module.h>
> >> +#include <linux/msi.h>
> >> #include <linux/of_address.h>
> >> #include <linux/of_irq.h>
> >> #include <linux/of_platform.h>
> >> #include <linux/platform_device.h>
> >> #include <linux/slab.h>
> >>
> >> +/* Interrupt numbers per mbigen node supported */
> >> +#define IRQS_PER_MBIGEN_NODE 128
> >> +
> >> +/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
> >> +#define RESERVED_IRQ_PER_MBIGEN_CHIP 64
> >> +
> >> +/**
> >> + * In mbigen vector register
> >> + * bit[21:12]: event id value
> >> + * bit[11:0]: device id
> >> + */
> >> +#define IRQ_EVENT_ID_SHIFT 12
> >> +#define IRQ_EVENT_ID_MASK 0x3ff
> >> +
> >> +/* register range of each mbigen node */
> >> +#define MBIGEN_NODE_OFFSET 0x1000
> >> +
> >> +/* offset of vector register in mbigen node */
> >> +#define REG_MBIGEN_VEC_OFFSET 0x200
> >> +
> >> /**
> >> * struct mbigen_device - holds the information of mbigen device.
> >> *
> >> @@ -34,10 +57,94 @@ struct mbigen_device {
> >> void __iomem *base;
> >> };
> >>
> >> +static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
> >> +{
> >> + unsigned int nid, pin;
> >> +
> >> + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
> >> + nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
> >> + pin = hwirq % IRQS_PER_MBIGEN_NODE;
> >> +
> >> + return pin * 4 + nid * MBIGEN_NODE_OFFSET
> >> + + REG_MBIGEN_VEC_OFFSET;
> >> +}
> >> +
> >> +static struct irq_chip mbigen_irq_chip = {
> >> + .name = "mbigen-v2",
> >> +};
> >> +
> >> +static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
> >> +{
> >> + struct irq_data *d = irq_get_irq_data(desc->irq);
> >> + void __iomem *base = d->chip_data;
> >> + u32 val;
> >> +
> >> + base += get_mbigen_vec_reg(d->hwirq);
> >> + val = readl_relaxed(base);
> >> +
> >> + val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
> >> + val |= (msg->data << IRQ_EVENT_ID_SHIFT);
> >> +
> >> + writel_relaxed(val, base);
> >
> > nit: It would be good to have a comment explaining why you do not need
> > to program the address of the doorbell...
>
> The address of doorbell is encoded in mbigen register by default,
> So, we don't need to program the doorbell address in mbigen driver.
>
> I'll add this comment in next version.
>
> >
> >> +}
> >> +
> >> +static int mbigen_domain_translate(struct irq_domain *d,
> >> + struct irq_fwspec *fwspec,
> >> + unsigned long *hwirq,
> >> + unsigned int *type)
> >> +{
> >> + if (is_of_node(fwspec->fwnode)) {
> >> + if (fwspec->param_count != 2)
> >> + return -EINVAL;
> >> +
> >> + *hwirq = fwspec->param[0];
> >> + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
> >> +
> >> + return 0;
> >> + }
> >> + return -EINVAL;
> >> +}
> >> +
> >> +static int mbigen_irq_domain_alloc(struct irq_domain *domain,
> >> + unsigned int virq,
> >> + unsigned int nr_irqs,
> >> + void *args)
> >> +{
> >> + struct irq_fwspec *fwspec = args;
> >> + irq_hw_number_t hwirq;
> >> + unsigned int type;
> >> + struct mbigen_device *mgn_chip;
> >> + int i, err;
> >> +
> >> + err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
> >> + if (err)
> >> + return err;
> >> +
> >> + err = platform_msi_domain_alloc(domain, virq, nr_irqs);
> >> + if (err)
> >> + return err;
> >> +
> >> + mgn_chip = platform_msi_get_host_data(domain);
> >> +
> >> + for (i = 0; i < nr_irqs; i++)
> >> + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
> >> + &mbigen_irq_chip, mgn_chip->base);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct irq_domain_ops mbigen_domain_ops = {
> >> + .translate = mbigen_domain_translate,
> >> + .alloc = mbigen_irq_domain_alloc,
> >> + .free = irq_domain_free_irqs_common,
> >> +};
> >> +
> >> static int mbigen_device_probe(struct platform_device *pdev)
> >> {
> >> struct mbigen_device *mgn_chip;
> >> struct resource *res;
> >> + struct irq_domain *domain;
> >> + u32 num_msis;
> >>
> >> mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
> >> if (!mgn_chip)
> >> @@ -50,6 +157,18 @@ static int mbigen_device_probe(struct platform_device *pdev)
> >> if (IS_ERR(mgn_chip->base))
> >> return PTR_ERR(mgn_chip->base);
> >>
> >> + /* If there is no "num-msis" property, assume 64... */
> >> + if (of_property_read_u32(pdev->dev.of_node, "num-msis", &num_msis) < 0)
> >> + num_msis = 64;
> >
> > nit: Is that always true? This has been lifted from my dummy example,
>
> do you mean patch v2? I just checked your patch, this part still exits.

It does exist because this example is just a toy, and I wanted to make
it easy for people to play with it.

> so
> > I wonder if that's what you actually want to do.
>
> I think the default num_msis value should be maximum msis(256) the current
> msi core supported.

I don't think so. If you have a fallback mechanism, it should reflect
the default value on your *own* HW. If there is no common value that is
generally used, then you should not have a default.

> How about your opinion, or I need to remove this part ?

If you don't know what this value should really be, just drop that
part, and generate an error when the num-msis property is not present.

Thanks,

M.
--
Without deviation from the norm, progress is not possible.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/