[PATCH 16/23] mtd: docg3: switch to mtd_ooblayout_ops
From: Boris Brezillon
Date: Mon Dec 07 2015 - 17:30:12 EST
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
drivers/mtd/devices/docg3.c | 34 +++++++++++++++++++++++++++++-----
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 6b516e1..7463dd8 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -73,10 +73,34 @@ MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
* @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
* @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
*/
-static struct nand_ecclayout docg3_oobinfo = {
- .eccbytes = 8,
- .eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
- .oobfree = {{0, 7}, {15, 1} },
+static int docg3_eccpos(struct mtd_info *mtd, int eccbyte)
+{
+ if (eccbyte >= 8)
+ return -ERANGE;
+
+ return eccbyte + 7;
+}
+
+static int docg3_oobfree(struct mtd_info *mtd, int section,
+ struct nand_oobfree *oobfree)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobfree->offset = 0;
+ oobfree->length = 7;
+ } else {
+ oobfree->offset = 15;
+ oobfree->length = 1;
+ }
+
+ return 0;
+}
+
+static const struct nand_ooblayout_ops nand_ooblayout_docg3_ops = {
+ .eccpos = docg3_eccpos,
+ .oobfree = docg3_oobfree,
};
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
@@ -1857,7 +1881,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->_read_oob = doc_read_oob;
mtd->_write_oob = doc_write_oob;
mtd->_block_isbad = doc_block_isbad;
- mtd_set_ecclayout(mtd, &docg3_oobinfo);
+ mtd_set_ooblayout_ops(mtd, &nand_ooblayout_docg3_ops);
mtd->oobavail = 8;
mtd->ecc_strength = DOC_ECC_BCH_T;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/