Re: [PATCH v4 1/8] ARM: dts: Exynos542x/5800: add cluster regulator supply properties

[Krzysztof Kozlowski]

On 08.12.2015 03:18, Bartlomiej Zolnierkiewicz wrote:
> Add cluster regulator supply properties as a preparation to
> adding generic cpufreq-dt driver support for Exynos542x and
> Exynos5800 based boards.
> 
> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Cc: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>

That's Javier's old email, not working any more. I think he same applies
to Mike's in CC-list.

> Cc: Andreas Faerber <afaerber@xxxxxxx>
> Cc: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos5420-arndale-octa.dts   | 8 ++++++++
>  arch/arm/boot/dts/exynos5420-peach-pit.dts      | 8 ++++++++
>  arch/arm/boot/dts/exynos5420-smdk5420.dts       | 8 ++++++++
>  arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 8 ++++++++
>  arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 8 ++++++++
>  arch/arm/boot/dts/exynos5422-odroidxu4.dts      | 8 ++++++++
>  arch/arm/boot/dts/exynos5800-peach-pi.dts       | 8 ++++++++
>  7 files changed, 56 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index 4ecef69..4229641 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -52,6 +52,14 @@
>  	};
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck6_reg>;
> +};
> +
>  &usbdrd_dwc3_1 {
>  	dr_mode = "host";
>  };
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 35cfb07..30f146b 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -676,6 +676,14 @@
>  	};
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck6_reg>;
> +};
> +
>  &i2c_2 {
>  	status = "okay";
>  	samsung,i2c-sda-delay = <100>;
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index ac35aef..fdfe4e6 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -423,3 +423,11 @@
>  &usbdrd_phy1 {
>  	vbus-supply = <&usb301_vbus_reg>;
>  };
> +
> +&cpu0 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck6_reg>;
> +};
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
> index 2ae1cf4..0bfd981 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
> @@ -54,6 +54,14 @@
>  	};
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&buck6_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +
>  &pwm {
>  	/*
>  	 * PWM 0 -- fan
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> index 432406d..b19561c 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> @@ -53,6 +53,14 @@
>  	};
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&buck6_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +
>  &i2c_0 {
>  	status = "okay";
>  
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> index 2faf886..bdc7106 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
> @@ -32,6 +32,14 @@
>  	};
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&buck6_reg>;
> +};
> +
> +&cpu4 {
> +	cpu-supply = <&buck2_reg>;
> +};
> +

How about putting these Odroid changes in exynos5422-odroidxu3-common.dtsi?

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/