[PATCH] usb: remove redundant conditions
From: Geyslan G. Bem
Date: Wed Dec 09 2015 - 20:53:08 EST
This patch removes redundant conditions.
- (!A || (A && B)) is the same as (!A || B).
- (length && length > 5) can be reduced to a single evaluation.
Caught by: cppcheck
Signed-off-by: Geyslan G. Bem <geyslan@xxxxxxxxx>
---
drivers/usb/gadget/udc/s3c-hsudc.c | 2 +-
drivers/usb/host/fhci-sched.c | 2 +-
drivers/usb/musb/musb_gadget.c | 5 ++---
drivers/usb/serial/io_edgeport.c | 35 ++++++++++++++---------------------
drivers/usb/serial/mos7840.c | 2 +-
5 files changed, 19 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index e9def42..82a9e2a 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -569,7 +569,7 @@ static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc,
hsep = &hsudc->ep[ep_num];
switch (le16_to_cpu(ctrl->wValue)) {
case USB_ENDPOINT_HALT:
- if (set || (!set && !hsep->wedge))
+ if (set || !hsep->wedge)
s3c_hsudc_set_halt(&hsep->ep, set);
return 0;
}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 95ca598..23ecac5 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -288,7 +288,7 @@ static int scan_ed_list(struct fhci_usb *usb,
list_for_each_entry(ed, list, node) {
td = ed->td_head;
- if (!td || (td && td->status == USB_TD_INPROGRESS))
+ if (!td || (td->status == USB_TD_INPROGRESS))
continue;
if (ed->state != FHCI_ED_OPER) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 67ad630..87bd578 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -353,9 +353,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
* 1 >0 Yes(FS bulk)
*/
if (!musb_ep->hb_mult ||
- (musb_ep->hb_mult &&
- can_bulk_split(musb,
- musb_ep->type)))
+ can_bulk_split(musb,
+ musb_ep->type))
csr |= MUSB_TXCSR_AUTOSET;
}
csr &= ~MUSB_TXCSR_P_UNDERRUN;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index c086697..f49327d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1046,9 +1046,8 @@ static void edge_close(struct usb_serial_port *port)
edge_port->closePending = true;
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPChase) {
/* flush and chase */
edge_port->chaseResponsePending = true;
@@ -1061,9 +1060,8 @@ static void edge_close(struct usb_serial_port *port)
edge_port->chaseResponsePending = false;
}
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPClose))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPClose) {
/* close the port */
dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
@@ -1612,9 +1610,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
int status;
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPChase) {
/* flush and chase */
edge_port->chaseResponsePending = true;
@@ -1628,9 +1625,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
}
}
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) {
if (break_state == -1) {
dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
status = send_iosp_ext_cmd(edge_port,
@@ -2465,9 +2461,8 @@ static void change_port_settings(struct tty_struct *tty,
unsigned char stop_char = STOP_CHAR(tty);
unsigned char start_char = START_CHAR(tty);
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetXChar) {
send_iosp_ext_cmd(edge_port,
IOSP_CMD_SET_XON_CHAR, start_char);
send_iosp_ext_cmd(edge_port,
@@ -2494,13 +2489,11 @@ static void change_port_settings(struct tty_struct *tty,
}
/* Set flow control to the configured value */
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)
send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)
send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 8ac9b55..2c69bfc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -635,7 +635,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
* Byte 4 IIR Port 4 (port.number is 3)
* Byte 5 FIFO status for both */
- if (length && length > 5) {
+ if (length > 5) {
dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
return;
}
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/