Re: [PATCH v2] PCI/AER: enable SERR# forwarding for bridges and switches

[Sinan Kaya]

On 12/11/2015 6:30 PM, Sinan Kaya wrote:
>> I think the best way to fix all the cases would be to do something in
>> > in pci_configure_device().  Then we could drop the AER bus walk in
>> > set_downstream_devices_error_reporting().  A bus walk like that is
>> > always an issue for hotplug.
>> > 
> Let me read some code.
> 

OK, If I understand it right; pci_configure_device is where
program_hpp_type0 called. You also want to enable AER in this function.

Move the contents of set_device_error_reporting into
pci_configure_device like this below ?

...
+ int type = pci_pcie_type(dev);

pci_configure_mps(dev);

+	if ((type == PCI_EXP_TYPE_ROOT_PORT) ||
+	    (type == PCI_EXP_TYPE_UPSTREAM) ||
+	    (type == PCI_EXP_TYPE_DOWNSTREAM)) {
+		pci_enable_pcie_error_reporting(dev);
+	}

+	pcie_set_ecrc_checking(dev);




-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/