Re: [PATCH v2] extcon: add Maxim MAX3355 driver

[Rob Herring]

On Mon, Dec 14, 2015 at 11:36 AM, Sergei Shtylyov
<sergei.shtylyov@xxxxxxxxxxxxxxxxxx> wrote:
> Hello.
>
> On 12/14/2015 04:24 AM, Rob Herring wrote:
>
>>> Maxim  Integrated MAX3355E chip integrates a  charge pump and comparators
>>> to
>>> enable a system with an integrated USB OTG dual-role transceiver to
>>> function
>>> as  an USB  OTG dual-role device.  In addition  to sensing/controlling
>>> Vbus,
>>> the chip also passes thru the ID signal  from the USB  OTG connector.
>>> On some Renesas boards,  this signal is  just fed into the SoC thru a
>>> GPIO
>>> pin --  there's no real  OTG controller, only host and gadget USB
>>> controllers
>>> sharing the same USB bus; however, we'd  like to allow host or gadget
>>> drivers
>>> to be loaded depending on the cable type,  hence the need for the MAX3355
>>> extcon driver. The Vbus status signals are also  wired to GPIOs (however,
>>> we
>>> aren't currently interested in them),  the OFFVBUS# signal is controlled
>>> by
>>> the host controllers, there's  also the SHDN# signal wired to a GPIO, it
>>> should be driven high for the  normal operation.
>>
>>
>> As multiple people have said, fix the spacing here.
>
>
>    You are the first to complain abou _this_ patch. If you don't have other
> issues with this driver in which case you should have trimmed the reply at
> this point), I'd like to keep my spacing as is. Thank you.

Your previous version was not "extcon-usb-gpio: add enable pin
support"[1] which has now been re-written to be max3355 specific? "So
what" and "I'd like to keep my spacing as is" aren't valid reasons.
Fix it, then I'll look at the rest again.

Rob

[1] https://patchwork.ozlabs.org/patch/555378/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/