[PATCH v3 9/9] phy: omap-usb2: use *syscon* framework API to power on/off the PHY
From: Kishon Vijay Abraham I
Date: Tue Dec 15 2015 - 04:17:24 EST
Deprecate using phy-omap-control driver to power on/off the PHY,
and use *syscon* framework to do the same. This handles
powering on/off the PHY for the USB2 PHYs used in various TI SoCs.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 8 +-
drivers/phy/phy-omap-usb2.c | 94 ++++++++++++++++++----
include/linux/phy/omap_usb.h | 23 ++++++
3 files changed, 107 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 49e5b0c..a3b3945 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -31,6 +31,8 @@ OMAP USB2 PHY
Required properties:
- compatible: Should be "ti,omap-usb2"
+ Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
+ in DRA7x
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
@@ -40,10 +42,14 @@ Required properties:
* "wkupclk" - wakeup clock.
* "refclk" - reference clock (optional).
-Optional properties:
+Deprecated properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
the PHY.
+Recommended properies:
+- syscon-phy-power : phandle/offset pair. Phandle to the system control
+ module and the register offset to power on/off the PHY.
+
This is usually a subnode of ocp2scp to which it is connected.
usb2phy@4a0ad080 {
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index c79633e..c9c04ff 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,8 @@
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/phy/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/of_platform.h>
#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
@@ -97,22 +99,40 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
return 0;
}
-static int omap_usb_power_off(struct phy *x)
+static int omap_usb_phy_power(struct omap_usb *phy, int on)
{
- struct omap_usb *phy = phy_get_drvdata(x);
+ u32 val;
+ int ret;
- omap_control_phy_power(phy->control_dev, 0);
+ if (phy->syscon_phy_power) {
+ if (on)
+ val = phy->power_on;
+ else
+ val = phy->power_off;
+
+ ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
+ phy->mask, val);
+ if (ret < 0)
+ return ret;
+ } else {
+ omap_control_phy_power(phy->control_dev, on);
+ }
return 0;
}
-static int omap_usb_power_on(struct phy *x)
+static int omap_usb_power_off(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
- omap_control_phy_power(phy->control_dev, 1);
+ return omap_usb_phy_power(phy, false);
+}
- return 0;
+static int omap_usb_power_on(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+
+ return omap_usb_phy_power(phy, true);
}
static int omap_usb_init(struct phy *x)
@@ -147,21 +167,38 @@ static const struct phy_ops ops = {
static const struct usb_phy_data omap_usb2_data = {
.label = "omap_usb2",
.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data omap5_usb2_data = {
.label = "omap5_usb2",
.flags = 0,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
};
static const struct usb_phy_data dra7x_usb2_data = {
.label = "dra7x_usb2",
.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_phy2_data = {
+ .label = "dra7x_usb2_phy2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_USB2_PHY_PD,
+ .power_off = OMAP_USB2_PHY_PD,
};
static const struct usb_phy_data am437x_usb2_data = {
.label = "am437x_usb2",
.flags = 0,
+ .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
+ AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
};
static const struct of_device_id omap_usb2_id_table[] = {
@@ -178,6 +215,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
.data = &dra7x_usb2_data,
},
{
+ .compatible = "ti,dra7x-usb2-phy2",
+ .data = &dra7x_usb2_phy2_data,
+ },
+ {
.compatible = "ti,am437x-usb2",
.data = &am437x_usb2_data,
},
@@ -219,6 +260,9 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->phy.label = phy_data->label;
phy->phy.otg = otg;
phy->phy.type = USB_PHY_TYPE_USB2;
+ phy->mask = phy_data->mask;
+ phy->power_on = phy_data->power_on;
+ phy->power_off = phy_data->power_off;
if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -228,20 +272,36 @@ static int omap_usb2_probe(struct platform_device *pdev)
phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
}
- control_node = of_parse_phandle(node, "ctrl-module", 0);
- if (!control_node) {
- dev_err(&pdev->dev, "Failed to get control device phandle\n");
- return -EINVAL;
- }
+ phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
+ "syscon-phy-power");
+ if (IS_ERR(phy->syscon_phy_power)) {
+ dev_dbg(&pdev->dev,
+ "can't get syscon-phy-power, using control device\n");
+ phy->syscon_phy_power = NULL;
+
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(&pdev->dev,
+ "Failed to get control device phandle\n");
+ return -EINVAL;
+ }
- control_pdev = of_find_device_by_node(control_node);
- if (!control_pdev) {
- dev_err(&pdev->dev, "Failed to get control device\n");
- return -EINVAL;
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+ phy->control_dev = &control_pdev->dev;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-phy-power", 1,
+ &phy->power_reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get power reg. offset\n");
+ return -EINVAL;
+ }
}
- phy->control_dev = &control_pdev->dev;
-
otg->set_host = omap_usb_set_host;
otg->set_peripheral = omap_usb_set_peripheral;
if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
index dc2c541..2e5fb87 100644
--- a/include/linux/phy/omap_usb.h
+++ b/include/linux/phy/omap_usb.h
@@ -30,6 +30,12 @@ struct usb_dpll_params {
u32 mf;
};
+enum omap_usb_phy_type {
+ TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
+ TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+ TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
struct omap_usb {
struct usb_phy phy;
struct phy_companion *comparator;
@@ -40,11 +46,20 @@ struct omap_usb {
struct clk *wkupclk;
struct clk *optclk;
u8 flags;
+ enum omap_usb_phy_type type;
+ struct regmap *syscon_phy_power; /* ctrl. reg. acces */
+ unsigned int power_reg; /* power reg. index within syscon */
+ u32 mask;
+ u32 power_on;
+ u32 power_off;
};
struct usb_phy_data {
const char *label;
u8 flags;
+ u32 mask;
+ u32 power_on;
+ u32 power_off;
};
/* Driver Flags */
@@ -52,6 +67,14 @@ struct usb_phy_data {
#define OMAP_USB2_HAS_SET_VBUS (1 << 1)
#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
+#define OMAP_DEV_PHY_PD BIT(0)
+#define OMAP_USB2_PHY_PD BIT(28)
+
+#define AM437X_USB2_PHY_PD BIT(0)
+#define AM437X_USB2_OTG_PD BIT(1)
+#define AM437X_USB2_OTGVDET_EN BIT(19)
+#define AM437X_USB2_OTGSESSEND_EN BIT(20)
+
#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/