[PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
From: Mans Rullgard
Date: Tue Dec 15 2015 - 18:26:32 EST
This moves all global data into the driver private struct, thus
permitting multiple devices of this type to be used.
Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
---
drivers/ata/sata_dwc_460ex.c | 80 ++++++++++++++++++++------------------------
1 file changed, 36 insertions(+), 44 deletions(-)
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index d07aae1..919f870 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -146,6 +146,8 @@ struct sata_dwc_device {
struct ata_host *host;
u8 __iomem *reg_base;
struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
+ u32 sactive_issued;
+ u32 sactive_queued;
struct phy *phy;
#ifdef CONFIG_SATA_DWC_OLD_DMA
struct dw_dma_chip *dma;
@@ -190,14 +192,6 @@ enum {
SATA_DWC_DMA_PENDING_RX = 2,
};
-struct sata_dwc_host_priv {
- void __iomem *scr_addr_sstatus;
- u32 sata_dwc_sactive_issued ;
- u32 sata_dwc_sactive_queued ;
-};
-
-static struct sata_dwc_host_priv host_pvt;
-
/*
* Prototypes
*/
@@ -448,21 +442,22 @@ static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
return 0;
}
-static u32 core_scr_read(unsigned int scr)
+static u32 core_scr_read(struct sata_dwc_device *hsdev, unsigned int scr)
{
- return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
+ return in_le32(hsdev->reg_base + SATA_DWC_SCR_OFFSET + (scr * 4));
}
-static void core_scr_write(unsigned int scr, u32 val)
+static void core_scr_write(struct sata_dwc_device *hsdev, unsigned int scr,
+ u32 val)
{
- out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
+ out_le32(hsdev->reg_base + SATA_DWC_SCR_OFFSET + (scr * 4), val);
}
-static void clear_serror(void)
+static void clear_serror(struct sata_dwc_device *hsdev)
{
u32 val;
- val = core_scr_read(SCR_ERROR);
- core_scr_write(SCR_ERROR, val);
+ val = core_scr_read(hsdev, SCR_ERROR);
+ core_scr_write(hsdev, SCR_ERROR, val);
}
static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
@@ -489,7 +484,7 @@ static void sata_dwc_error_intr(struct ata_port *ap,
ata_ehi_clear_desc(ehi);
- serror = core_scr_read(SCR_ERROR);
+ serror = core_scr_read(hsdev, SCR_ERROR);
status = ap->ops->sff_check_status(ap);
tag = ap->link.active_tag;
@@ -500,7 +495,7 @@ static void sata_dwc_error_intr(struct ata_port *ap,
hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
/* Clear error register and interrupt bit */
- clear_serror();
+ clear_serror(hsdev);
clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
/* This is the only error happening now. TODO check for exact error */
@@ -539,7 +534,7 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
int handled, num_processed, port = 0;
uint intpr, sactive, sactive2, tag_mask;
struct sata_dwc_device_port *hsdevp;
- host_pvt.sata_dwc_sactive_issued = 0;
+ hsdev->sactive_issued = 0;
spin_lock_irqsave(&host->lock, flags);
@@ -568,7 +563,7 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
- host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+ hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
qc = ata_qc_from_tag(ap, tag);
/*
@@ -582,11 +577,11 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
handled = 1;
goto DONE;
}
- sactive = core_scr_read(SCR_ACTIVE);
- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+ sactive = core_scr_read(hsdev, SCR_ACTIVE);
+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
/* If no sactive issued and tag_mask is zero then this is not NCQ */
- if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+ if (hsdev->sactive_issued == 0 && tag_mask == 0) {
if (ap->link.active_tag == ATA_TAG_POISON)
tag = 0;
else
@@ -656,22 +651,19 @@ DRVSTILLBUSY:
*/
/* process completed commands */
- sactive = core_scr_read(SCR_ACTIVE);
- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+ sactive = core_scr_read(hsdev, SCR_ACTIVE);
+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
- if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
- tag_mask > 1) {
+ if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
dev_dbg(ap->dev,
"%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
- __func__, sactive, host_pvt.sata_dwc_sactive_issued,
- tag_mask);
+ __func__, sactive, hsdev->sactive_issued, tag_mask);
}
- if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
- (host_pvt.sata_dwc_sactive_issued)) {
+ if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
dev_warn(ap->dev,
- "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n",
- sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
+ "Bad tag mask? sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
+ sactive, hsdev->sactive_issued, tag_mask);
}
/* read just to clear ... not bad if currently still busy */
@@ -733,7 +725,7 @@ STILLBUSY:
* we were processing --we read status as part of processing a completed
* command).
*/
- sactive2 = core_scr_read(SCR_ACTIVE);
+ sactive2 = core_scr_read(hsdev, SCR_ACTIVE);
if (sactive2 != sactive) {
dev_dbg(ap->dev,
"More completed - sactive=0x%x sactive2=0x%x\n",
@@ -819,8 +811,9 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status = 0;
u32 mask = 0x0;
u8 tag = qc->tag;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
- host_pvt.sata_dwc_sactive_queued = 0;
+ hsdev->sactive_queued = 0;
dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
@@ -833,10 +826,8 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
/* clear active bit */
mask = (~(qcmd_tag_to_mask(tag)));
- host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
- & mask;
- host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
- & mask;
+ hsdev->sactive_queued = hsdev->sactive_queued & mask;
+ hsdev->sactive_issued = hsdev->sactive_issued & mask;
ata_qc_complete(qc);
return 0;
}
@@ -961,7 +952,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
}
/* Clear any error bits before libata starts issuing commands */
- clear_serror();
+ clear_serror(hsdev);
ap->private_data = hsdevp;
dev_dbg(ap->dev, "%s: done\n", __func__);
return 0;
@@ -999,6 +990,7 @@ static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
{
unsigned long flags;
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
ata_get_cmd_descript(tf->command), tag);
@@ -1012,7 +1004,7 @@ static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
* managed SError register for the disk needs to be done before the
* task file is loaded.
*/
- clear_serror();
+ clear_serror(hsdev);
ata_sff_exec_command(ap, tf);
}
@@ -1065,7 +1057,7 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
sata_dwc_tf_dump(ap, &qc->tf);
if (start_dma) {
- reg = core_scr_read(SCR_ERROR);
+ reg = core_scr_read(hsdev, SCR_ERROR);
if (reg & SATA_DWC_SERROR_ERR_BITS) {
dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
__func__, reg);
@@ -1128,6 +1120,7 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
u32 sactive;
u8 tag = qc->tag;
struct ata_port *ap = qc->ap;
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
#ifdef DEBUG_NCQ
if (qc->tag > 0 || ap->link.sactive > 1)
@@ -1144,9 +1137,9 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
sata_dwc_qc_prep_by_tag(qc, tag);
if (ata_is_ncq(qc->tf.protocol)) {
- sactive = core_scr_read(SCR_ACTIVE);
+ sactive = core_scr_read(hsdev, SCR_ACTIVE);
sactive |= (0x00000001 << tag);
- core_scr_write(SCR_ACTIVE, sactive);
+ core_scr_write(hsdev, SCR_ACTIVE, sactive);
dev_dbg(qc->ap->dev,
"%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
@@ -1289,7 +1282,6 @@ static int sata_dwc_probe(struct platform_device *ofdev)
/* Setup port */
host->ports[0]->ioaddr.cmd_addr = base;
host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
- host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
/* Read the ID and Version Registers */
--
2.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/