[PATCH] regulator: mt6311: Use REGCACHE_RBTREE

[Daniel Kurtz]

This regulator is on a slow i2c bus.  Register accesses are very simple,
they all either enable/disable a regulator channel, or select a new
voltage level.  Thus, reading registers from the device will always
return what was last written.

Therefore we can save a lot of time when reading registers by using a
regmap_cache.  Since the register map is relatively large, but we only
ever access a few of them, we use an RBTREE cache.

Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
Acked-by: Henry Chen <henryc.chen@xxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/mt6311-regulator.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c
index 02c4e5feca8e..0495716fd35f 100644
--- a/drivers/regulator/mt6311-regulator.c
+++ b/drivers/regulator/mt6311-regulator.c
@@ -30,6 +30,7 @@ static const struct regmap_config mt6311_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = MT6311_FQMTR_CON4,
+	.cache_type = REGCACHE_RBTREE,
 };
 
 /* Default limits measured in millivolts and milliamps */
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/