[PATCH 05/13] staging: fbtft: Use standard MIPI DCS command defines for ili9340
From: Priit Laes
Date: Sun Dec 20 2015 - 13:39:31 EST
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/staging/fbtft/fb_ili9340.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c
index e0e2539..9b24c9e 100644
--- a/drivers/staging/fbtft/fb_ili9340.c
+++ b/drivers/staging/fbtft/fb_ili9340.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
@@ -53,7 +54,7 @@ static int init_display(struct fbtft_par *par)
/* COLMOD: Pixel Format Set */
/* 16 bits/pixel */
- write_reg(par, 0x3A, 0x55);
+ write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
/* Frame Rate Control */
/* Division ratio = fosc, Frame Rate = 79Hz */
@@ -65,8 +66,8 @@ static int init_display(struct fbtft_par *par)
/* Gamma Function Disable */
write_reg(par, 0xF2, 0x00);
- /* Gamma curve selected */
- write_reg(par, 0x26, 0x01);
+ /* Gamma curve selection */
+ write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
/* Positive Gamma Correction */
write_reg(par, 0xE0,
@@ -78,27 +79,24 @@ static int init_display(struct fbtft_par *par)
0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
- /* Sleep OUT */
- write_reg(par, 0x11);
+ write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
mdelay(120);
- /* Display ON */
- write_reg(par, 0x29);
+ write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- /* Column address */
- write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
- /* Row address */
- write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
- /* Memory write */
- write_reg(par, 0x2C);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
#define ILI9340_MADCTL_MV 0x20
@@ -123,7 +121,7 @@ static int set_var(struct fbtft_par *par)
break;
}
/* Memory Access Control */
- write_reg(par, 0x36, val | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
return 0;
}
--
2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/