[PATCH v3 42/77] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS

From: Finn Thain
Date: Mon Dec 21 2015 - 21:44:51 EST


The workarounds for chip errata appear twice, in slightly different
forms. One is used when defined(REAL_DMA) || defined(REAL_DMA_POLL), the
other when defined(PSEUDO_DMA). In the PDMA case, the workarounds have
been made conditional on FLAG_NO_DMA_FIXUPS. Do the same for the DMA case,
to eliminate the READ_OVERRUNS macro.

Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>

---
drivers/scsi/NCR5380.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)

Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-12-22 12:16:32.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-12-22 12:16:34.000000000 +1100
@@ -94,11 +94,6 @@
#undef REAL_DMA
#endif

-#ifdef REAL_DMA_POLL
-#undef READ_OVERRUNS
-#define READ_OVERRUNS
-#endif
-
#ifdef BOARD_REQUIRES_NO_DELAY
#define io_recovery_delay(x)
#else
@@ -1586,11 +1581,10 @@ static int NCR5380_transfer_dma(struct S
return -1;
}
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
-#ifdef READ_OVERRUNS
if (p & SR_IO) {
- c -= 2;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
+ c -= 2;
}
-#endif
dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d);
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
#endif
@@ -1676,13 +1670,14 @@ static int NCR5380_transfer_dma(struct S
*/

if (p & SR_IO) {
-#ifdef READ_OVERRUNS
- udelay(10);
- if (((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == (BASR_PHASE_MATCH | BASR_ACK))) {
- saved_data = NCR5380_read(INPUT_DATA_REGISTER);
- overrun = 1;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) {
+ udelay(10);
+ if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ saved_data = NCR5380_read(INPUT_DATA_REGISTER);
+ overrun = 1;
+ }
}
-#endif
} else {
int limit = 100;
while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) {
@@ -1704,8 +1699,8 @@ static int NCR5380_transfer_dma(struct S
*data += c;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;

-#ifdef READ_OVERRUNS
- if (*phase == p && (p & SR_IO) && residue == 0) {
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) &&
+ *phase == p && (p & SR_IO) && residue == 0) {
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
**data = saved_data;
@@ -1720,7 +1715,6 @@ static int NCR5380_transfer_dma(struct S
NCR5380_transfer_pio(instance, phase, &cnt, data);
*count -= toPIO - cnt;
}
-#endif

dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count));
return 0;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/