[PATCH v3 15/77] ncr5380: Always escalate bad target time-out in NCR5380_select()
From: Finn Thain
Date: Mon Dec 21 2015 - 21:51:13 EST
Remove the restart_select and targets_present variables introduced in
Linux v1.1.38. The former was used only for a questionable debug printk
and the latter "so we can call a select failure a retryable condition".
Well, retrying select failure in general is a different problem to a
target that doesn't assert BSY. We need to handle these two cases
differently; the latter case can be left to the SCSI ML.
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
---
drivers/scsi/NCR5380.c | 13 -------------
drivers/scsi/NCR5380.h | 6 ------
drivers/scsi/atari_NCR5380.c | 13 -------------
3 files changed, 32 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-12-22 12:15:47.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-12-22 12:15:48.000000000 +1100
@@ -790,7 +790,6 @@ static int NCR5380_init(struct Scsi_Host
#ifdef REAL_DMA
hostdata->dmalen = 0;
#endif
- hostdata->targets_present = 0;
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -1186,8 +1185,6 @@ static int NCR5380_select(struct Scsi_Ho
if (hostdata->selecting)
goto part2;
- hostdata->restart_select = 0;
-
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
@@ -1363,21 +1360,12 @@ part2:
if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << scmd_id(cmd))) {
- printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no);
- if (hostdata->restart_select)
- printk(KERN_DEBUG "\trestart select\n");
- NCR5380_dprint(NDEBUG_SELECTION, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
cmd->result = DID_BAD_TARGET << 16;
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
return 0;
}
- hostdata->targets_present |= (1 << scmd_id(cmd));
/*
* Since we followed the SCSI spec, and raised ATN while SEL
@@ -2382,7 +2370,6 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-12-22 12:15:47.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-12-22 12:15:48.000000000 +1100
@@ -826,7 +826,6 @@ static int __init NCR5380_init(struct Sc
#if defined (REAL_DMA)
hostdata->dma_len = 0;
#endif
- hostdata->targets_present = 0;
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -1409,7 +1408,6 @@ static int NCR5380_select(struct Scsi_Ho
unsigned long timeout;
unsigned long flags;
- hostdata->restart_select = 0;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
instance->this_id);
@@ -1625,14 +1623,6 @@ static int NCR5380_select(struct Scsi_Ho
if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << cmd->device->id)) {
- printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
- if (hostdata->restart_select)
- printk(KERN_NOTICE "\trestart select\n");
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
cmd->result = DID_BAD_TARGET << 16;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
@@ -1643,8 +1633,6 @@ static int NCR5380_select(struct Scsi_Ho
return 0;
}
- hostdata->targets_present |= (1 << cmd->device->id);
-
/*
* Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
@@ -2605,7 +2593,6 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2015-12-22 12:15:44.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2015-12-22 12:15:48.000000000 +1100
@@ -257,9 +257,6 @@ struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
- unsigned char targets_present; /* targets we have connected
- to, so we can call a select
- failure a retryable condition */
volatile unsigned char busy[8]; /* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
volatile int dma_len; /* requested length of DMA */
@@ -268,9 +265,6 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *connected; /* currently connected command */
volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
- volatile int restart_select; /* we have disconnected,
- used to restart
- NCR5380_select() */
int flags;
unsigned long time_expires; /* in jiffies, set prior to sleeping */
int select_time; /* timer in select for target response */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/