Re: GPIO-driven RTS on TI hardware with 8250_omap driver

[ÐÐÑÑÑ ÐÐÑÐÐÐÐ]

Hi Matwey,

2015-12-27 16:14 GMT+03:00 Matwey V. Kornilov <matwey@xxxxxxxxxx>:
> The half of what is described here are implemented in my patches.
> But I cannot understand the other half. Each of six AM335x UARTs has
> RTS/CTS pins which are controlled by pinmux in device tree, no magic
> required here.

The problem here is, the appliance schematics are already designed in
such way that pins which can be configured as "native" RTS are not
used for RS485 control - the ones that are though may only be used as
GPIO flipped by software on transmission start/end for that purpose.
We simply cannot change the schematics on production because of this
issue alone.

Regards,
Ilyas G.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/