[PATCH] serial: imx: fix dcd interrupt firing during probe

[Marcel Ziswiler]

Continuing on the Apalis iMX6 mainlining work started by Petr Åtetiar I
noticed that it only boots when rebooting from NXP's downstream 3.14.28
kernel or mainline otherwise (e.g. when cold booted) I did not get any
serial debug output at all. Enabling earlyprintk I got the following:

[    1.136806] INFO: trying to register non-static key.
[    1.136871] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25,
base_baud = 5000000) is a IMX
[    1.150651] the code is fine but needs lockdep annotation.
[    1.150653] turning off the locking correctness validator.
[    1.150664] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc6-
next-20151223-00002-g6008f30-dirty #27
[    1.150668] Hardware name: Freescale i.MX6 Quad/DualLite (Device
Tree)
[    1.150675] Backtrace:
[    1.150701] [<c010c45c>] (dump_backtrace) from [<c010c654>]
(show_stack+0x18/0x1c)
[    1.150722]  r7:00000000 r6:c0d20848 r5:00000000 r4:00000000
[    1.150739] [<c010c63c>] (show_stack) from [<c03dadcc>]
(dump_stack+0x8c/0xa4)
[    1.150760] [<c03dad40>] (dump_stack) from [<c016b60c>]
(__lock_acquire+0x1d88/0x1eb4)
[    1.150774]  r7:00000000 r6:c0d063f8 r5:c155f834 r4:e503bc20
[    1.150785] [<c0169884>] (__lock_acquire) from [<c016bf54>]
(lock_acquire+0x74/0x94)
[    1.150803]  r10:c0d6eb5e r9:e597b300 r8:00000019 r7:00000001
r6:00000001 r5:60000193
[    1.150808]  r4:00000000
[    1.150821] [<c016bee0>] (lock_acquire) from [<c08d49d4>]
(_raw_spin_lock_irqsave+0x40/0x54)
[    1.150834]  r7:000052c8 r6:c0481470 r5:40000193 r4:e503bc10
[    1.150852] [<c08d4994>] (_raw_spin_lock_irqsave) from [<c0481470>]
(imx_rxint+0x20/0x2a4)
[    1.150862]  r6:00000000 r5:000052d0 r4:e503bc10
[    1.150874] [<c0481450>] (imx_rxint) from [<c0482540>]
(imx_int+0x170/0x1f4)

Debugging a little further I noticed this actually happening after
calling devm_request_irq() during serial_imx_probe() even before
uart_add_one_port() did initialise the spin_lock acquired in
imx_rxint(). Turns out the data carrier detect interrupt fired
immediately upon requesting interrupts. This patch fixes this by
explicitly disabling data carrier detect before requesting interrupts.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>

---

 drivers/tty/serial/imx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9362f54c..b1588f9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2032,6 +2032,11 @@ static int serial_imx_probe(struct platform_device *pdev)
 		 UCR1_TXMPTYEN | UCR1_RTSDEN);
 	writel_relaxed(reg, sport->port.membase + UCR1);
 
+	/* Disable data carrier detect before requesting interrupts */
+	reg = readl_relaxed(sport->port.membase + UCR3);
+	reg &= ~(UCR3_DCD);
+	writel_relaxed(reg, sport->port.membase + UCR3);
+
 	clk_disable_unprepare(sport->clk_ipg);
 
 	/*
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/