[PATCH v3 1/4] USB: serial: cp210x: New register access functions.

[Konstantin Shkolnyy]

cp210x_get_config and cp210x_set_config are cumbersome to use. This change
introduces new register access functions to replace them. New functions
are not yet called - the switch is done gradually in following changes.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@xxxxxxxxx>
---
change in v3: Presented new function addition as a separate patch #1,
to simplify code review.

 drivers/usb/serial/cp210x.c | 166 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 166 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fd67958..324eb7e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -323,6 +323,172 @@ struct cp210x_comm_status {
 #define PURGE_ALL		0x000f
 
 /*
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
+ */
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	void *dmabuf;
+	int result;
+
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
+		return -ENOMEM;
+	}
+
+	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			req, REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
+			USB_CTRL_SET_TIMEOUT);
+	if (result == bufsize) {
+		memcpy(buf, dmabuf, bufsize);
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
+			result = -EPROTO;
+
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
+	}
+
+	kfree(dmabuf);
+
+	return result;
+}
+
+/*
+ * Reads any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
+{
+	__le32 le32_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
+	if (err) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		*val = 0;
+		return err;
+	}
+
+	*val = le32_to_cpu(le32_val);
+
+	return 0;
+}
+
+/*
+ * Reads any 16-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
+{
+	__le16 le16_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
+	if (err)
+		return err;
+
+	*val = le16_to_cpu(le16_val);
+
+	return 0;
+}
+
+/*
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+	return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
+ */
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result;
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, val,
+			port_priv->bInterfaceNumber, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+	if (result < 0) {
+		dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+				req, result);
+	}
+
+	return result;
+}
+
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	void *dmabuf;
+	int result;
+
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	memcpy(dmabuf, buf, bufsize);
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
+			USB_CTRL_SET_TIMEOUT);
+
+	kfree(dmabuf);
+
+	if (result == bufsize) {
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
+			result = -EPROTO;
+	}
+
+	return result;
+}
+
+/*
+ * Writes any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
+{
+	__le32 le32_val;
+
+	le32_val = cpu_to_le32(val);
+
+	return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
+}
+
+/*
  * cp210x_get_config
  * Reads from the CP210x configuration registers
  * 'size' is specified in bytes.
-- 
1.8.4.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/