[PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A

[Finn Thain]

From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>

Add I/O register mapping for NCR53C400A and enable PDMA mode to
improve performance and fix non-working IRQ.

Tested with HP C2502 (and user-space enabler).

Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>

---

Changes to Ondrej's version:
- An 'if' statement is now a 'switch' statement.
- Throw an error if MMIO register locations are not known.

---
 drivers/scsi/g_NCR5380.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c	2016-01-03 16:04:51.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c	2016-01-03 16:04:53.000000000 +1100
@@ -323,7 +323,7 @@ static int __init generic_NCR5380_detect
 #endif
 			break;
 		case BOARD_NCR53C400A:
-			flags = FLAG_NO_PSEUDO_DMA;
+			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
 			break;
 		case BOARD_DTC3181E:
@@ -405,27 +405,42 @@ static int __init generic_NCR5380_detect
 		 * On NCR53C400 boards, NCR5380 registers are mapped 8 past
 		 * the base address.
 		 */
-		if (overrides[current_override].board == BOARD_NCR53C400) {
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
 			instance->io_port += 8;
 			hostdata->c400_ctl_status = 0;
 			hostdata->c400_blk_cnt = 1;
 			hostdata->c400_host_buf = 4;
+			break;
+		case BOARD_NCR53C400A:
+			hostdata->c400_ctl_status = 9;
+			hostdata->c400_blk_cnt = 10;
+			hostdata->c400_host_buf = 8;
+			break;
 		}
 #else
 		instance->base = overrides[current_override].NCR5380_map_name;
 		hostdata->iomem = iomem;
-		if (overrides[current_override].board == BOARD_NCR53C400) {
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
 			hostdata->c400_ctl_status = 0x100;
 			hostdata->c400_blk_cnt = 0x101;
 			hostdata->c400_host_buf = 0x104;
+			break;
+		case BOARD_NCR53C400A:
+			pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+			goto out_unregister;
 		}
 #endif
 
 		if (NCR5380_init(instance, flags))
 			goto out_unregister;
 
-		if (overrides[current_override].board == BOARD_NCR53C400)
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
+		case BOARD_NCR53C400A:
 			NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+		}
 
 		NCR5380_maybe_reset_bus(instance);
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/