[PATCH v2 2/4] USB: mxu11x0: clean device control commands

[Mathieu OTHACEHE]

Sending OPEN and START commands twice is not necessary for this driver.
Also send STOP command at close.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@xxxxxxxxx>
---

Changes in v2:
* Only remove OPEN_PORT and START_PORT in open callback.

 drivers/usb/serial/mxu11x0.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
index 6196073..7ad2727 100644
--- a/drivers/usb/serial/mxu11x0.c
+++ b/drivers/usb/serial/mxu11x0.c
@@ -833,20 +833,6 @@ static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		mxu1_set_termios(tty, port, NULL);
 
-	status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
-				    open_settings, MXU1_UART1_PORT);
-	if (status) {
-		dev_err(&port->dev, "cannot send open command: %d\n", status);
-		goto unlink_int_urb;
-	}
-
-	status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
-				    0, MXU1_UART1_PORT);
-	if (status) {
-		dev_err(&port->dev, "cannot send start command: %d\n", status);
-		goto unlink_int_urb;
-	}
-
 	status = usb_serial_generic_open(tty, port);
 	if (status)
 		goto unlink_int_urb;
@@ -866,6 +852,13 @@ static void mxu1_close(struct usb_serial_port *port)
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 
+	status = mxu1_send_ctrl_urb(port->serial, MXU1_STOP_PORT,
+				    0, MXU1_UART1_PORT);
+	if (status) {
+		dev_err(&port->dev, "failed to send stop port command: %d\n",
+			status);
+	}
+
 	status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
 				    0, MXU1_UART1_PORT);
 	if (status) {
-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/