Re: [PATCH v4 4/5] misc: eeprom_93xx46: Add quirks to support Atmel AT93C46D device.

From: Cory Tusar
Date: Tue Jan 05 2016 - 22:20:57 EST


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 12/21/2015 07:19 PM, Vladimir Zapolskiy wrote:
>
>
> With best wishes,
> Vladimir
>
> On 10.12.2015 06:00, Cory Tusar wrote:
>> Atmel devices in this family have some quirks not found in other similar
>> chips - they do not support a sequential read of the entire EEPROM
>> contents, and the control word sent at the start of each operation
>> varies in bit length.
>>
>> This commit adds quirk support to the driver and modifies the read
>> implementation to support non-sequential reads for consistency with
>> other misc/eeprom drivers.
>>
>> Tested on a custom Freescale VF610-based platform, with an AT93C46D
>> device attached via dspi2. The spi-gpio driver was used to allow the
>> necessary non-byte-sized transfers.
>>
>> Signed-off-by: Cory Tusar <cory.tusar@xxxxxxxxxxxxxxxxx>
>> Tested-by: Chris Healy <chris.healy@xxxxxxxx>
>> ---
>> drivers/misc/eeprom/eeprom_93xx46.c | 126 ++++++++++++++++++++++++++----------
>> include/linux/eeprom_93xx46.h | 6 ++
>> 2 files changed, 97 insertions(+), 35 deletions(-)
>>
>> diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
>> index cc27e11..d50bc17 100644
>> --- a/drivers/misc/eeprom/eeprom_93xx46.c
>> +++ b/drivers/misc/eeprom/eeprom_93xx46.c
>> @@ -27,6 +27,15 @@
>> #define ADDR_ERAL 0x20
>> #define ADDR_EWEN 0x30
>>
>> +struct eeprom_93xx46_devtype_data {
>> + unsigned int quirks;
>> +};
>> +
>> +static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
>> + .quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ |
>> + EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
>> +};
>> +
>> struct eeprom_93xx46_dev {
>> struct spi_device *spi;
>> struct eeprom_93xx46_platform_data *pdata;
>> @@ -35,6 +44,16 @@ struct eeprom_93xx46_dev {
>> int addrlen;
>> };
>>
>> +static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev)
>> +{
>> + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ;
>> +}
>> +
>> +static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
>> +{
>> + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
>> +}
>> +
>> static ssize_t
>> eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
>> struct bin_attribute *bin_attr,
>> @@ -42,58 +61,73 @@ eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
>> {
>> struct eeprom_93xx46_dev *edev;
>> struct device *dev;
>> - struct spi_message m;
>> - struct spi_transfer t[2];
>> - int bits, ret;
>> - u16 cmd_addr;
>> + ssize_t ret = 0;
>>
>> dev = container_of(kobj, struct device, kobj);
>> edev = dev_get_drvdata(dev);
>>
>> - cmd_addr = OP_READ << edev->addrlen;
>> + mutex_lock(&edev->lock);
>>
>> - if (edev->addrlen == 7) {
>> - cmd_addr |= off & 0x7f;
>> - bits = 10;
>> - } else {
>> - cmd_addr |= (off >> 1) & 0x3f;
>> - bits = 9;
>> - }
>> + if (edev->pdata->prepare)
>> + edev->pdata->prepare(edev);
>>
>> - dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
>> - cmd_addr, edev->spi->max_speed_hz);
>> + while (count) {
>> + struct spi_message m;
>> + struct spi_transfer t[2] = { { 0 } };
>> + u16 cmd_addr = OP_READ << edev->addrlen;
>> + size_t nbytes = count;
>> + int bits;
>> + int err;
>> +
>> + if (edev->addrlen == 7) {
>> + cmd_addr |= off & 0x7f;
>> + bits = 10;
>> + if (has_quirk_single_word_read(edev))
>> + nbytes = 1;
>> + } else {
>> + cmd_addr |= (off >> 1) & 0x3f;
>> + bits = 9;
>> + if (has_quirk_single_word_read(edev))
>> + nbytes = 2;
>> + }
>>
>> - spi_message_init(&m);
>> - memset(t, 0, sizeof(t));
>> + dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
>> + cmd_addr, edev->spi->max_speed_hz);
>>
>> - t[0].tx_buf = (char *)&cmd_addr;
>> - t[0].len = 2;
>> - t[0].bits_per_word = bits;
>> - spi_message_add_tail(&t[0], &m);
>> + spi_message_init(&m);
>>
>> - t[1].rx_buf = buf;
>> - t[1].len = count;
>> - t[1].bits_per_word = 8;
>> - spi_message_add_tail(&t[1], &m);
>> + t[0].tx_buf = (char *)&cmd_addr;
>> + t[0].len = 2;
>> + t[0].bits_per_word = bits;
>> + spi_message_add_tail(&t[0], &m);
>>
>> - mutex_lock(&edev->lock);
>> + t[1].rx_buf = buf;
>> + t[1].len = count;
>> + t[1].bits_per_word = 8;
>> + spi_message_add_tail(&t[1], &m);
>>
>> - if (edev->pdata->prepare)
>> - edev->pdata->prepare(edev);
>> + err = spi_sync(edev->spi, &m);
>> + /* have to wait at least Tcsl ns */
>> + ndelay(250);
>>
>> - ret = spi_sync(edev->spi, &m);
>> - /* have to wait at least Tcsl ns */
>> - ndelay(250);
>> - if (ret) {
>> - dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
>> - count, (int)off, ret);
>> + if (err) {
>> + dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
>> + nbytes, (int)off, err);
>> + ret = err;
>> + break;
>> + }
>> +
>> + buf += nbytes;
>> + off += nbytes;
>> + count -= nbytes;
>> + ret += nbytes;
>> }
>>
>> if (edev->pdata->finish)
>> edev->pdata->finish(edev);
>>
>> mutex_unlock(&edev->lock);
>> - return ret ? : count;
>> + return ret;
>> }
>>
>> static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
>> @@ -112,7 +146,13 @@ static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
>> bits = 9;
>> }
>>
>> - dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr);
>> + if (has_quirk_instruction_length(edev)) {
>> + cmd_addr <<= 2;
>> + bits += 2;
>> + }
>> +
>> + dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n",
>> + is_on ? "en" : "ds", cmd_addr, bits);
>>
>> spi_message_init(&m);
>> memset(&t, 0, sizeof(t));
>> @@ -247,6 +287,13 @@ static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
>> bits = 9;
>> }
>>
>> + if (has_quirk_instruction_length(edev)) {
>> + cmd_addr <<= 2;
>> + bits += 2;
>> + }
>> +
>> + dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits);
>> +
>> spi_message_init(&m);
>> memset(&t, 0, sizeof(t));
>>
>> @@ -298,12 +345,15 @@ static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
>>
>> static const struct of_device_id eeprom_93xx46_of_table[] = {
>> { .compatible = "eeprom-93xx46", },
>> + { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
>
> Ok, got the second "atmel,at93c46d" here.

Yeah.

>
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
>>
>> static int eeprom_93xx46_probe_dt(struct spi_device *spi)
>> {
>> + const struct of_device_id *of_id =
>> + of_match_device(eeprom_93xx46_of_table, &spi->dev);
>> struct device_node *np = spi->dev.of_node;
>> struct eeprom_93xx46_platform_data *pd;
>> u32 tmp;
>> @@ -331,6 +381,12 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
>> if (of_property_read_bool(np, "read-only"))
>> pd->flags |= EE_READONLY;
>>
>> + if (of_id->data) {
>> + const struct eeprom_93xx46_devtype_data *data = of_id->data;
>> +
>> + pd->quirks = data->quirks;
>> + }
>> +
>> spi->dev.platform_data = pd;
>>
>> return 0;
>> diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
>> index 0679181..92fa4c3 100644
>> --- a/include/linux/eeprom_93xx46.h
>> +++ b/include/linux/eeprom_93xx46.h
>> @@ -9,6 +9,12 @@ struct eeprom_93xx46_platform_data {
>> #define EE_ADDR16 0x02 /* 16 bit addr. cfg */
>> #define EE_READONLY 0x08 /* forbid writing */
>>
>> + unsigned int quirks;
>> +/* Single word read transfers only; no sequential read. */
>> +#define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ (1 << 0)
>> +/* Instructions such as EWEN are (addrlen + 2) in length. */
>> +#define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH (1 << 1)
>> +
>> /*
>> * optional hooks to control additional logic
>> * before and after spi transfer.
>>
>
> Reviewed-by: Vladimir Zapolskiy <vz@xxxxxxxxx>

Thanks again for all the reviews.

Best regards,
- -Cory


- --
Cory Tusar
Principal
PID 1 Solutions, Inc.


"There are two ways of constructing a software design. One way is to
make it so simple that there are obviously no deficiencies, and the
other way is to make it so complicated that there are no obvious
deficiencies." --Sir Charles Anthony Richard Hoare

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iEYEARECAAYFAlaMiBAACgkQHT1tsfGwHJ/MLQCgju12m/YJl2wOEz/g9WqqMF0J
22gAn37PF8DaSfoUmCF0toTjPdVhk5Ks
=/kv3
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/