Re: [PATCH v2 2/4] PCI: rcar: Support runtime PM link state L1 handling in pcie-rcar

[Wolfram Sang]

On Tue, Jan 05, 2016 at 01:00:29PM +0000, Phil Edworthy wrote:
> The R-Car PCIe host controller does not handle L1 ASPM. Instead, the
> hardware needs assistance to transition to L1. When the controller
> has received a PM_ENTER_L1 DLLP, we can't access a card's config regs
> until we have got it out of L1 link state. The host controller will
> handle this as long as it has also been transitioned to L1 link state.
> 
> So, when attempting a config access, check to see if the card has gone
> into L1, and if so, do the same for the host controller.
> 
> This is based on a patch by Hien Dang <hien.dang.eb@xxxxxxxxxxxxxxx>
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> ---
> v2:
>  - Use readl_poll_timeout_atomic when waiting until we are in L1.

Acked-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

Attachment: signature.asc
Description: Digital signature