[PATCH V2] regulator: max8973: add support for junction thermal warning

From: Laxman Dewangan
Date: Wed Jan 06 2016 - 11:17:36 EST


The driver MAX8973 supports the driver for Maxim PMIC MAX77621.
MAX77621 supports the junction temp warning at 120 degC and
140 degC which is configurable. It generates alert signal when
junction temperature crosses these threshold.

MAX77621 does not support the continuous temp monitoring of
junction temperature. It just report whether junction temperature
crossed the threshold or not.

Add support to
- Configure junction temp warning threshold via DT property
to generate alert when it crosses the threshold.
- Add support to interrupt the host from this device when alert
occurred.
- read the junction temp via thermal framework.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
Changes from v1:
- Remove irq flags from DT
- More details about supported temp by MAX77621

.../bindings/regulator/max8973-regulator.txt | 5 +
drivers/regulator/max8973-regulator.c | 140 ++++++++++++++++++++-
include/linux/regulator/max8973-regulator.h | 4 +
3 files changed, 147 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
index f80ea2f..93f9939 100644
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -31,6 +31,11 @@ Optional properties:
property is available then etr will be enable default.

Enhanced transient response (ETR) will affect the configuration of CKADV.
+-maxim,junction-temp-warning: Junction temp warning on which device generates
+ warning interrupts. This is in millicelcius.
+
+Please note that thermal functionality is only supported on MAX77621. The
+threshold warning supported by MAX77621 are 120 degC and 140 degC.

Example:

diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 5b75b7c..4640d1b 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -38,6 +38,9 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>

/* Register definitions */
#define MAX8973_VOUT 0x0
@@ -74,6 +77,7 @@
#define MAX8973_WDTMR_ENABLE BIT(6)
#define MAX8973_DISCH_ENBABLE BIT(5)
#define MAX8973_FT_ENABLE BIT(4)
+#define MAX77621_T_JUNCTION_120 BIT(7)

#define MAX8973_CKKADV_TRIP_MASK 0xC
#define MAX8973_CKKADV_TRIP_DISABLE 0xC
@@ -93,6 +97,13 @@
#define MAX8973_VOLATGE_STEP 6250
#define MAX8973_BUCK_N_VOLTAGE 0x80

+#define MAX77621_CHIPID_TJINT_S BIT(0)
+
+#define MAX77621_NORMAL_OPERATING_TEMP 100000
+#define MAX77621_TJINT_WARNING_TEMP_120 120000
+#define MAX77621_TJINT_WARNING_TEMP_140 140000
+
+
enum device_id {
MAX8973,
MAX77621
@@ -112,6 +123,9 @@ struct max8973_chip {
int curr_gpio_val;
struct regulator_ops ops;
enum device_id id;
+ int junction_temp_warning;
+ int irq;
+ struct thermal_zone_device *tz_device;
};

/*
@@ -391,6 +405,10 @@ static int max8973_init_dcdc(struct max8973_chip *max,
if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
control1 |= MAX8973_FREQSHIFT_9PER;

+ if ((max->id == MAX77621) && (pdata->junction_temp_warning ==
+ MAX77621_TJINT_WARNING_TEMP_120))
+ control2 |= MAX77621_T_JUNCTION_120;
+
if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
control2 |= MAX8973_DISCH_ENBABLE;

@@ -457,6 +475,100 @@ static int max8973_init_dcdc(struct max8973_chip *max,
return ret;
}

+#ifdef CONFIG_THERMAL_OF
+static int max8973_thermal_read_temp(void *data, int *temp)
+{
+ struct max8973_chip *mchip = data;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val);
+ if (ret < 0) {
+ dev_err(mchip->dev, "register CHIPID1 read failed, %d", ret);
+ return ret;
+ }
+
+ /* +1 degC to trigger cool devive */
+ if (val & MAX77621_CHIPID_TJINT_S)
+ *temp = mchip->junction_temp_warning + 1000;
+ else
+ *temp = MAX77621_NORMAL_OPERATING_TEMP;
+
+ return 0;
+}
+
+static irqreturn_t max8973_thermal_irq(int irq, void *data)
+{
+ struct max8973_chip *mchip = data;
+
+ dev_info(mchip->dev, "Junction Temp warning occurred\n");
+ thermal_zone_device_update(mchip->tz_device,
+ THERMAL_DEVICE_EVENT_THRESHOLD);
+ return IRQ_HANDLED;
+}
+
+static const struct thermal_zone_of_device_ops max77621_tz_ops = {
+ .get_temp = max8973_thermal_read_temp,
+};
+
+static int max8973_thermal_init(struct max8973_chip *mchip)
+{
+ struct irq_data *irq_data;
+ unsigned long irq_flags = 0;
+ int ret;
+
+ if (mchip->id != MAX77621)
+ return 0;
+
+ mchip->tz_device = thermal_zone_of_sensor_register(mchip->dev, 0,
+ mchip, &max77621_tz_ops);
+ if (IS_ERR(mchip->tz_device)) {
+ ret = PTR_ERR(mchip->tz_device);
+ dev_err(mchip->dev,
+ "Device can not register as thermal sensor: %d\n", ret);
+ mchip->tz_device = NULL;
+ return ret;
+ }
+
+ if (mchip->irq <= 0)
+ return 0;
+
+ irq_data = irq_get_irq_data(mchip->irq);
+ if (irq_data)
+ irq_flags = irqd_get_trigger_type(irq_data);
+ ret = request_threaded_irq(mchip->irq, NULL, max8973_thermal_irq,
+ IRQF_ONESHOT | IRQF_SHARED | irq_flags,
+ dev_name(mchip->dev), mchip);
+ if (ret < 0) {
+ dev_err(mchip->dev, "request irq %d failed: %d\n",
+ mchip->irq, ret);
+ goto fail;
+ }
+ return 0;
+
+fail:
+ thermal_zone_of_sensor_unregister(mchip->dev, mchip->tz_device);
+ return ret;
+}
+
+static void max8973_thermal_deinit(struct max8973_chip *mchip)
+{
+ if ((mchip->id != MAX77621) || !mchip->tz_device)
+ return;
+
+ if (mchip->irq > 0)
+ free_irq(mchip->irq, mchip);
+
+ thermal_zone_of_sensor_unregister(mchip->dev, mchip->tz_device);
+}
+#else
+static int max8973_thermal_init(struct max8973_chip *mchip)
+{
+ return 0;
+}
+static void max8973_thermal_deinit(struct max8973_chip *mchip) { }
+#endif
+
static const struct regmap_config max8973_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -465,9 +577,10 @@ static const struct regmap_config max8973_regmap_config = {
};

static struct max8973_regulator_platform_data *max8973_parse_dt(
- struct device *dev)
+ struct i2c_client *client)
{
struct max8973_regulator_platform_data *pdata;
+ struct device *dev = &client->dev;
struct device_node *np = dev->of_node;
int ret;
u32 pval;
@@ -521,6 +634,13 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
}

+ ret = of_property_read_u32(np, "maxim,junction-temp-warning", &pval);
+ if (!ret)
+ pdata->junction_temp_warning = pval;
+ pdata->junction_temp_warning = (pdata->junction_temp_warning <
+ MAX77621_TJINT_WARNING_TEMP_120) ?
+ MAX77621_TJINT_WARNING_TEMP_120 :
+ MAX77621_TJINT_WARNING_TEMP_140;
return pdata;
}

@@ -546,7 +666,7 @@ static int max8973_probe(struct i2c_client *client,
pdata = dev_get_platdata(&client->dev);

if (!pdata && client->dev.of_node) {
- pdata = max8973_parse_dt(&client->dev);
+ pdata = max8973_parse_dt(client);
pdata_from_dt = true;
}

@@ -592,6 +712,7 @@ static int max8973_probe(struct i2c_client *client,
(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);

i2c_set_clientdata(client, max);
+ max->irq = client->irq;
max->ops = max8973_dcdc_ops;
max->dev = &client->dev;
max->desc.name = id->name;
@@ -608,6 +729,7 @@ static int max8973_probe(struct i2c_client *client,
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
+ max->junction_temp_warning = pdata->junction_temp_warning;

if (gpio_is_valid(max->enable_gpio))
max->enable_external_control = true;
@@ -718,6 +840,19 @@ static int max8973_probe(struct i2c_client *client,
return ret;
}

+ ret = max8973_thermal_init(max);
+ if (ret < 0)
+ dev_info(max->dev, "Juntion Thermal not initialised, %d\n",
+ ret);
+
+ return 0;
+}
+
+static int max8973_remove(struct i2c_client *i2c)
+{
+ struct max8973_chip *mchip = i2c_get_clientdata(i2c);
+
+ max8973_thermal_deinit(mchip);
return 0;
}

@@ -734,6 +869,7 @@ static struct i2c_driver max8973_i2c_driver = {
.of_match_table = of_max8973_match_tbl,
},
.probe = max8973_probe,
+ .remove = max8973_remove,
.id_table = max8973_id,
};

diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h
index f6a8a16..abde9c4 100644
--- a/include/linux/regulator/max8973-regulator.h
+++ b/include/linux/regulator/max8973-regulator.h
@@ -54,6 +54,9 @@
* @reg_init_data: The regulator init data.
* @control_flags: Control flags which are ORed value of above flags to
* configure device.
+ * @junction_temp_warning: Junction temp in millicelcius on which warning need
+ * to be set. Thermal functionality is only supported on MAX77621.
+ * The threshold warning supported by MAX77621 are 120C and 140C.
* @enable_ext_control: Enable the voltage enable/disable through external
* control signal from EN input pin. If it is false then
* voltage output will be enabled/disabled through EN bit of
@@ -67,6 +70,7 @@
struct max8973_regulator_platform_data {
struct regulator_init_data *reg_init_data;
unsigned long control_flags;
+ int junction_temp_warning;
bool enable_ext_control;
int enable_gpio;
int dvs_gpio;
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/